DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / SRS Airbag, Occupant Detection or Combination Meter / Data List.
(e) Read the Data List according to the display on the Techstream.
SRS Airbag (Center Airbag Sensor Assembly)
Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
---|---|---|---|
Passenger Classification |
Front passenger side seat condition /NG, AM50, AF05, Child or OFF |
NG: Data not determined AM50: Adult seated AF05: Adult seated Child: Child seated OFF: Vacant |
- |
Driver Buckle SW |
Driver side seat belt buckle switch/Unset, Set or NG |
Unset: Driver side seat belt unfastened Set: Driver side seat belt fastened NG: Data not determined |
- |
Passenger Buckle SW |
Front passenger side seat belt buckle switch/Unset, Set or NG |
Unset: Front passenger side seat belt unfastened Set: Front passenger side seat belt fastened NG: Data not determined |
- |
Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
---|---|---|---|
Passenger Buckle SW |
Front passenger side seat belt buckle switch/Unset, Set or NG |
Unset: Front passenger side seat belt unfastened Set: Front passenger side seat belt fastened NG: Data not determined |
- |
Passenger Classification |
Front passenger side seat condition/NG, AM50, AF05, Child or OFF |
NG: Data not determined AM50: Adult seated AF05: Adult seated Child: Child seated OFF: Vacant |
- |
Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
---|---|---|---|
Driver Side Seatbelt Warning Buzzer |
Driver side seat belt warning buzzer/ON or OFF |
Customized value displayed |
- |
P-Seatbelt Warning Buzzer |
Front passenger side seat belt warning buzzer/ON or OFF |
Customized value displayed |
- |
2. ACTIVE TEST
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Combination Meter / Active Test.
(e) Perform the Active Test according to the display on the Techstream.
Combination Meter (Combination Meter Assembly)
Tester Display |
Test Part |
Control Range |
Diagnostic Note |
---|---|---|---|
Driver Side Seat Belt |
Driver side seat belt warning light |
OFF or ON |
Confirm that the vehicle stopped with the engine idling. |
Front Passenger Side Seat Belt |
Front passenger side seat belt warning light |
OFF or ON |
Confirm that the vehicle stopped with the engine idling. |
Adjusting the settings
- Adjusting the temperature setting
Turn the temperature control dial clockwise (warm) or counterclockwise (cool).
The air conditioning system switches between dual and simultaneous modes each
time is pressed.
Each temperature setting will be displ ...
Trip information
Display items can be switched by pressing the “INFO-CLOCK” button.
- Average fuel consumption (AVERAGE ECON)
Displays the average fuel consumption since the function was reset.
• The
function can be reset by pressing and holding the “RESET ...
Brake Override System
DESCRIPTION
When the vehicle is being driven, depressing the accelerator pedal sensor assembly
and brake pedal will activate the brake override system to restrict driving torque.
The conditions for activating the brake override system as well as the items ...