Toyota Venza: Diagnostic Trouble Code Chart

Toyota Venza Service Manual / Supplemental Restraint Systems / Airbag System / Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART

If a trouble code is displayed during the DTC check, check the circuit listed for the code in the table below (refer to the appropriate page).

HINT:

When the SRS warning light remains on and the DTC output is the normal system code, a voltage source drop is likely occurring. This malfunction is not stored in memory by the center airbag sensor assembly. If the power source voltage returns to normal, the SRS warning light will automatically go off.
When 2 or more codes are indicated, the code with the lower number appears first.
If a code is not listed on the display chart, the center airbag sensor assembly may have failed.
In the case of any malfunction concerning an open circuit, short to ground, or short to B+ due to a squib, other trouble codes may not be detected. In this case, repair the malfunction currently indicated and then perform malfunction diagnosis again.
Mark in the check mode column:
*1: DTC does not correspond to check mode.

*2: DTC corresponds to check mode.

Airbag System

DTC Code	Detection Item	Check Mode
B1000/31	Center Airbag Sensor Assembly Malfunction	*1
B1610/13	Front Airbag Sensor RH Malfunction	*1
B1612/83	Lost Communication with Front Airbag Sensor RH	*1
B1613/83	Front Airbag Sensor RH Initialization Incomplete	*1
B1615/14	Front Airbag Sensor LH Malfunction	*1
B1617/84	Lost Communication with Front Airbag Sensor LH	*1
B1618/84	Front Airbag Sensor LH Initialization Incomplete	*1
B161A/8A	Lost Communication with Front Satellite Sensor Bus	*1
B1630/23	Rear Airbag Sensor RH Circuit Malfunction	*1
B1632/81	Lost Communication with Rear Airbag Sensor RH	*1
B1633/81	Rear Airbag Sensor Assembly RH Initialization Incomplete	*1
B1635/24	Rear Airbag Sensor LH Circuit Malfunction	*1
B1637/82	Lost Communication with Rear Airbag Sensor LH	*1
B1638/82	Rear Airbag Sensor Assembly LH Initialization Incomplete	*1
B1642/81	Lost Communication with Side Satellite Sensor Bus RH	*1
B1647/82	Lost Communication with Side Satellite Sensor Bus LH	*1
B1650/32	Occupant Classification System Malfunction	*1
B1653/35	Seat Position Airbag Sensor Circuit Malfunction	*1
B1656/38	Seat Belt Buckle Switch LH Circuit Malfunction	*1
B1660/43	Passenger Airbag ON/OFF Indicator Circuit Malfunction	*2
B1690/15	Door Side Airbag Sensor RH Malfunction	*1
B1692/81	Lost Communication with Door Side Airbag Sensor RH	*1
B1693/81	Door Side Airbag Sensor RH Initialization Incomplete	*1
B1695/16	Door Side Airbag Sensor LH Malfunction	*1
B1697/82	Lost Communication with Door Side Airbag Sensor LH	*1
B1698/82	Door Side Airbag Sensor LH Initialization Incomplete	*1
B1800/51	Short in Driver Side Squib Circuit	*2
B1801/51	Open in Driver Side Squib Circuit	*2
B1802/51	Short to GND in Driver Side Squib Circuit	*2
B1803/51	Short to B+ in Driver Side Squib Circuit	*2
B1805/52	Short in Front Passenger Side Squib Circuit	*2
B1806/52	Open in Front Passenger Side Squib Circuit	*2
B1807/52	Short to GND in Front Passenger Side Squib Circuit	*2
B1808/52	Short to B+ in Front Passenger Side Squib Circuit	*2
B1810/53	Short in Driver Side Squib 2nd Step Circuit	*2
B1811/53	Open in Driver Side Squib 2nd Step Circuit	*2
B1812/53	Short to GND in Driver Side Squib 2nd Step Circuit	*2
B1813/53	Short to B+ in Driver Side Squib 2nd Step Circuit	*2
B1815/54	Short in Front Passenger Side Squib 2nd Step Circuit	*2
B1816/54	Open in Front Passenger Side Squib 2nd Step Circuit	*2
B1817/54	Short to GND in Front Passenger Side Squib 2nd Step Circuit	*2
B1818/54	Short to B+ in Front Passenger Side Squib 2nd Step Circuit	*2
B181A/7A	Short in Passenger Side Airbag Variable Vent Hole Squib Circuit	*2
B181B/7A	Open in Passenger Side Airbag Variable Vent Hole Squib Circuit	*2
B181C/7A	Short to GND in Passenger Side Airbag Variable Vent Hole Squib Circuit	*2
B181D/7A	Short to B+ in Passenger Side Airbag Variable Vent Hole Squib Circuit	*2
B1820/55	Short in Side Squib RH Circuit	*2
B1821/55	Open in Side Squib RH Circuit	*2
B1822/55	Short to GND in Side Squib RH Circuit	*2
B1823/55	Short to B+ in Side Squib RH Circuit	*2
B1825/56	Short in Side Squib LH Circuit	*2
B1826/56	Open in Side Squib LH Circuit	*2
B1827/56	Short to GND in Side Squib LH Circuit	*2
B1828/56	Short to B+ in Side Squib LH Circuit	*2
B1830/57	Short in Curtain Shield Squib RH Circuit	*2
B1831/57	Open in Curtain Shield Squib RH Circuit	*2
B1832/57	Short to GND in Curtain Shield Squib RH Circuit	*2
B1833/57	Short to B+ in Curtain Shield Squib RH Circuit	*2
B1835/58	Short in Curtain Shield Squib LH Circuit	*2
B1836/58	Open in Curtain Shield Squib LH Circuit	*2
B1837/58	Short to GND in Curtain Shield Squib LH Circuit	*2
B1838/58	Short to B+ in Curtain Shield Squib LH Circuit	*2
B1860/64	Short in Driver Side Knee Airbag Squib Circuit	*2
B1861/64	Open in Driver Side Knee Airbag Squib Circuit	*2
B1862/64	Short to GND in Driver Side Knee Airbag Squib Circuit	*2
B1863/64	Short to B+ in Driver Side Knee Airbag Squib Circuit	*2
B1900/73	Short in Front Pretensioner Squib RH Circuit	*2
B1901/73	Open in Front Pretensioner Squib RH Circuit	*2
B1902/73	Short to GND in Front Pretensioner Squib RH Circuit	*2
B1903/73	Short to B+ in Front Pretensioner Squib RH Circuit	*2
B1905/74	Short in Front Pretensioner Squib LH Circuit	*2
B1906/74	Open in Front Pretensioner Squib LH Circuit	*2
B1907/74	Short to GND in Front Pretensioner Squib LH Circuit	*2
B1908/74	Short to B+ in Front Pretensioner Squib LH Circuit	*2

Data List / Active Test

DATA LIST / ACTIVE TEST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non ...

Passenger Airbag ON/OFF Indicator Circuit Malfunction (B1660/43)

DESCRIPTION The passenger airbag ON/OFF indicator circuit consists of the center airbag sensor assembly and accessory meter assembly (passenger airbag ON/OFF indicator). The passenger airbag ON/OF ...

Other materials about Toyota Venza:

Inspection
INSPECTION PROCEDURE 1. INSPECT TIE ROD ASSEMBLY LH (a) Secure the tie rod assembly LH in a vise. (b) Install the nut to the stud bolt. (c) Flip the ball joint back and forth 5 times. (d) Set a to ...

Diagnosis System
DIAGNOSIS SYSTEM 1. CHECK BATTERY VOLTAGE Standard voltage: 11 to 14 V If the voltage is below 11 V, recharge the battery before proceeding to the next step. 2. CHECK DLC3 (a) The ECU uses ISO 15765-4 for communication. The terminal arrangement of the ...

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. CONNECT TECHSTREAM (a) Connect the Techstream to the DLC3. (b) Start the engine and run it at idle. (c) Enter the following menus: Chassis / ABS/VSC/TRAC / Active Test. HINT: Refer to the Techstream operator's manu ...