Toyota Venza manuals

Toyota Venza: Satellite Radio Broadcast cannot be Received

Toyota Venza Service Manual / Navigation / Multi Info Display / Navigation System / Satellite Radio Broadcast cannot be Received

CAUTION / NOTICE / HINT

NOTICE:

Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it will not be possible to listen to the broadcast.

PROCEDURE

1.

CHECK SURROUNDINGS

(a) Check if the vehicle is in an environment where reception is difficult due to something blocking the area above the vehicle.

Text in Illustration

*a

Example

*b

In a tunnel

*c

In a building

*d

Under an overpass

*e

On a forest or tree-lined path

*f

Between tall buildings

*g

Under a cliff or overhang

-

-

HINT:

If the area above the vehicle is blocked, such as when in a building or tunnel, reception may not be possible.

OK:

Area above vehicle is not blocked.


NG

END (MOVE VEHICLE TO LOCATION WHERE RECEPTION IS BETTER)


OK

2.

CHECK NAVIGATION RECEIVER ASSEMBLY

(a) Check if CH001 (free broadcast) can be received.

OK:

CH001 can be received.


NG

GO TO STEP 6


OK

3.

CHECK DISPLAY SETTING

(a) Check the display screen.

Result

Proceed to

"SAT Ch Unauth" is displayed.

A

"-----" is displayed.

B

None of the displays above are shown.

C


B

THERE IS NO SONG/PROGRAM TITLE OR ARTIST NAME/FEATURE ASSOCIATED WITH CHANNEL AT THAT TIME


C

GO TO STEP 6


A

4.

CHECK CONTRACT CONDITIONS

(a) Check if the pay-type contract has been extended, or if the contract period has ended.

OK:

Pay-type contract is valid.


NG

TO RECEIVE PAY-TYPE BROADCASTS, CONTRACT MUST BE MADE WITH SATELLITE RADIO COMPANY


OK

5.

PERFORM ACTIVATION REFRESH

(a) Perform activation refresh by referring to the satellite radio company web site (http://care.siriusxm.com/retailrefresh_view.action).

OK:

Malfunction disappears.

HINT:

The XM radio ID that is necessary to perform activation refresh is displayed when CH000 is selected on the satellite radio.


OK

END


NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

6.

CHECK DISPLAY

(a) Check the display screen.

Result

Proceed to

"SAT Ck Antenna" is displayed.

A

"SAT No Signal" is displayed.

B

"Loading" is displayed.

B

"SAT Ch Off Air" is displayed.

C

After "SAT Ch Unavail" is displayed, display automatically switches to CH001.

D

None of the displays above are shown.

E


B

END (MOVE VEHICLE TO LOCATION WHERE RECEPTION IS BETTER)


C

CHANNEL IS CURRENTLY NOT BEING BROADCASTED. BROADCAST CAN BE LISTENED TO OR VIEWED WHEN IT IS BACK ON AIR. (CONFIRM WITH RADIO STATION)


D

CHANNEL BROADCAST HAS ENDED (CONFIRM WITH RADIO STATION)


E

GO TO STEP 13


A

7.

REPLACE ROOF ANTENNA POLE SUB-ASSEMBLY

(a) Replace the roof antenna pole sub-assembly with a new or known good one and check if radio broadcasts can be received normally (See page ).


OK:

Radio broadcasts can be received normally.


OK

END


NG

8.

REPLACE NAVIGATION WIRE

(a) Replace the navigation wire with a new or known good one and check if radio broadcasts can be received normally (See page
).

OK:

Radio broadcasts can be received normally.


OK

END


NG

9.

REPLACE ANTENNA CORD SUB-ASSEMBLY

(a) Replace the antenna cord sub-assembly with a new or known good one and check if radio broadcasts can be received normally (See page ).


OK:

Radio broadcasts can be received normally.


OK

END


NG

10.

REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY

(a) Replace the No. 2 antenna cord sub-assembly with a new or known good one and check if radio broadcasts can be received normally (See page ).


OK:

Radio broadcasts can be received normally.


OK

END


NG

11.

REPLACE NO. 3 ANTENNA CORD SUB-ASSEMBLY

(a) Replace the No. 3 antenna cord sub-assembly with a new or known good one and check if radio broadcasts can be received normally (See page ).


OK:

Radio broadcasts can be received normally.


OK

END


NG

12.

REPLACE SATELLITE RADIO ANTENNA ASSEMBLY

(a) Replace the satellite radio antenna assembly with a new or known good one and check if radio broadcasts can be received normally (See page ).


OK:

Radio broadcasts can be received normally.


OK

END


NG

13.

CONFIRM CURRENTLY SELECTED CHANNEL

(a) Check CH000 is currently selected.

OK:

CH000 is selected.


OK

END (CH000 HAS NO SOUND. SELECT ANOTHER CHANNEL.)


NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

HD Radio Tuner Malfunction (B1551,B15A0,B15AD,B15B0,B15B3,B15B4,B15B7)
DESCRIPTION These DTCs are stored when a malfunction occurs in the navigation receiver assembly. DTC No. DTC Detection Condition Trouble Area B1551 ...

Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory
CAUTION / NOTICE / HINT NOTICE: Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it will not be p ...

Other materials about Toyota Venza:

Adjustment
ADJUSTMENT PROCEDURE 1. INSPECT SHIFT LEVER POSITION (a) When moving the lever from P to R with the ignition switch ON and the brake pedal depressed, make sure that the shift lever moves smoothly and moves correctly into position. (b) Start the engine ...

ECU Power Source Circuit
DESCRIPTION This circuit provides power for main body ECU (driver side junction block assembly) operation. WIRING DIAGRAM PROCEDURE 1. CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY (MAIN BODY ECU (POWER SOURCE)) ...

TC and CG Terminal Circuit
DESCRIPTION DTC output mode is set by connecting terminals TC and CG of the DLC3. DTCs are displayed by blinking of the SRS warning light. HINT: When each warning light stays blinking, a ground short in the wiring of terminal TC of the DLC3 or ...

© 2016-2021 Copyright www.tovenza.com

0.2092