Toyota Venza manuals

Toyota Venza: Unmatched Key Code (B2795)

DESCRIPTION

This DTC is stored when a key with a key code that has not been registered in the ECU is inserted into the ignition key cylinder.

DTC No.

DTC Detection Condition

Trouble Area

B2795

Key with unregistered key code is inserted.

Key

CAUTION / NOTICE / HINT

NOTICE:

If the key is replaced, register the key (See page ).


PROCEDURE

1.

CLEAR DTC

(a) Clear the DTCs (See page ).



NEXT

2.

RE-REGISTER KEY

(a) Re-register the key (See page ).



NEXT

3.

CHECK ENGINE START

(a) Check that the engine starts.

OK:

The engine starts.


OK

END (KEY WAS NOT REGISTERED CORRECTLY)


NG

REPLACE KEY

Transponder Chip Malfunction (B2793)
DESCRIPTION This DTC is stored when a malfunction is found in the key during key code registration or a key code is not registered normally. Replace the key if the key code registration is not pe ...

Unmatched Encryption Code (B2794)
DESCRIPTION This DTC is stored when a key with an incomplete key code is inserted into the ignition key cylinder. DTC No. DTC Detection Condition Trouble Area ...

Other materials about Toyota Venza:

HD Radio Tuner Malfunction (B1551,B158D,B15A0,B15B0,B15B3,B15B4,B15B7)
DESCRIPTION These DTCs are stored when a malfunction occurs in the radio and display receiver assembly. DTC No. DTC Detection Condition Trouble Area B1551 When any of the following conditions is ...

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION (a) Apply the parking brake. (b) Turn the ignition switch to ON. (c) Depress the brake pedal and check that the engine starts when the shift lever is in N or P, b ...

Terminals Of Ecm
TERMINALS OF ECM 1. CHECK ECM Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition A49-7 (TC) - B58-104 (E1) V - BR Terminal TC o ...

© 2016-2024 Copyright www.tovenza.com

0.1479