Toyota Venza: Unmatched Encryption Code (B2794)

Toyota Venza Service Manual / Theft Deterrent / Keyless Entry / Engine Immobiliser System(w/o Smart Key System) / Unmatched Encryption Code (B2794)

DESCRIPTION

This DTC is stored when a key with an incomplete key code is inserted into the ignition key cylinder.

DTC No.	DTC Detection Condition	Trouble Area
B2794	Key with incomplete key code is inserted.	Key

CAUTION / NOTICE / HINT

NOTICE:

If the key is replaced, register the key (See page ).

PROCEDURE

1.	REPLACE KEY

(a) Replace the key.

2.	KEY REGISTRATION

(a) Register the key (See page ).

END (KEY WAS DEFECTIVE)

Unmatched Key Code (B2795)

DESCRIPTION This DTC is stored when a key with a key code that has not been registered in the ECU is inserted into the ignition key cylinder. DTC No. DTC Detection Condition ...

Door Courtesy Switch Circuit

DESCRIPTION When an additional transponder key is registered, the transponder key ECU assembly detects the front door courtesy light switch assembly (for driver side) open/close condition, and en ...

Other materials about Toyota Venza:

Installation
INSTALLATION PROCEDURE 1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY (a) Apply a light coat of gasoline or spindle oil to a new O-ring. Text in Illustration *1 O-ring ...

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (a) for RH Side (1) Operate the windshield wiper motor assembly. (2) Stop the windshield wiper motor assembly operation. ...

Installation
INSTALLATION PROCEDURE 1. INSTALL FRONT POWER SEAT LUMBAR SWITCH (a) Install the front power seat lumbar switch with the 2 screws. 2. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY 3. INSTALL SLIDE ...