SYSTEM DESCRIPTION
1. FUNCTION DESCRIPTION
(a) Steering Cooperative Control
(1) Enhanced-VSC performs coordinated control consisting of VSC and electronic power steering. By integrating these preventive safety functions, Enhanced-VSC ensures excellent driving stability and maneuverability of the vehicle.
(b) Anti-lock Brake System (ABS)
(1) The ABS helps prevent the wheels from locking when the brakes are applied firmly or when braking on a slippery surface.
(c) Electronic Brake force Distribution (EBD)
(1) The EBD control utilizes the ABS, and performs proper brake force distribution between the front and rear wheels in accordance with driving conditions.
When braking while cornering, it also controls the brake forces of the right and left wheels, helping to maintain vehicle behavior.
(d) Brake Assist (BA)
(1) The primary purpose of the brake assist system is to provide auxiliary brake force to assist a driver who cannot generate a large enough brake force during emergency braking, thus helping to maximize the brake performance of the vehicle.
(e) Traction Control (TRAC)
(1) The TRAC system helps prevent the drive wheels from slipping when the driver depresses the accelerator pedal excessively when starting off or accelerating on a slippery surface.
(f) Vehicle Stability Control (VSC)
(1) The VSC system helps prevent the vehicle from slipping sideways as a result of strong front or rear wheel skid during cornering.
(g) Hill-start Assist Control
(1) When the vehicle starts off on a steep or a slippery hill, hill-start assist control detects the backward movement of the vehicle and effects four-wheel hydraulic pressure control to prevents the vehicle from moving backward.
2. FUNCTION OF COMPONENTS
Component |
Function |
|
---|---|---|
Brake actuator assembly |
Skid control ECU |
Judges the vehicle driving condition based on the signals from each sensor, and sends the brake control signals to the brake actuator. |
Master cylinder pressure sensor |
Assembled in the brake actuator, detects the master cylinder pressure. |
|
ABS motor relay |
Supplies power to the pump motor. |
|
ABS solenoid relay |
Supplies power to the solenoid valves. |
|
Solenoid valves |
Change the fluid path based on the signals from the skid control ECU during the operation of the brake control system functions in order to control the fluid pressure applied to each wheel cylinder. |
|
Speed sensor |
Detects the wheel speed of each of the four wheels. |
|
VSC OFF switch |
Enables the driver to select normal mode, TRAC off mode or VSC off mode. |
|
Brake pedal load sensing switch |
Detects the brake pedal depressing force. |
|
Stop light switch |
Detects brake pedal operation. |
|
Stop light control (BRK) relay |
Illuminates the stop lights when hill-start assist control is operating. |
|
Steering angle sensor |
Detects the direction and angle of the steering wheel. |
|
Yaw rate and acceleration sensor |
|
|
Main body ECU (Driver side junction block) |
Detects the parking brake signal and outputs it to the skid control ECU via CAN communication. |
|
ECM |
|
|
Combination meter |
ABS warning light |
Illuminates to alert the driver when the skid control ECU detects a malfunction in the ABS or BA. |
Brake warning light |
|
|
Meter buzzer |
Emits a warning sound to inform the driver at the beginning and completion of hill-start assist control operation. |
|
Accessory meter |
TRAC OFF indicator light |
Illuminates to inform the driver when the TRAC off mode is selected. |
VSC OFF indicator light |
Illuminates to inform the driver when the VSC off mode is selected. |
|
Slip indicator light |
|
|
Master warning light*1 |
Illuminates to alert the driver when the skid control ECU detects a malfunction in the brake control system. |
|
Multi-information display*2 |
Displays a warning message to alert the driver when the skid control ECU detects a malfunction in the brake control function. |
*1: w/ master warning light
*2: w/ rear view monitor system
Dtc Check / Clear
DTC CHECK / CLEAR
1. DTC CHECK (USING SST CHECK WIRE)
(a) Check the DTCs (Current trouble codes).
(1) Turn the ignition switch to ON, and wait for approximately 60 seconds.
(2) Using SST, connect terminals TC and CG of the DLC3.
SST: 09843-18040
NOTICE ...
Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT SEAT HEADREST ASSEMBLY
2. REMOVE FRONT SEAT REAR OUTER TRACK COVER
3. REMOVE FRONT SEAT REAR INNER TRACK COVER
4. REMOVE FRONT SEAT ASSEMBLY
5. REMOVE RECLINING POWER SEAT SWITCH KNOB
6. REMOVE SLIDE AND VER ...
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT COOLING FAN OPERATION AT LOW TEMPERATURES (Below 83°C (181°F))
(a) Turn the ignition switch to ON.
(b) Check that the cooling fans stop.
If not, check the cooling fan relays and engine coolant temperature senso ...