Toyota Venza: System Description
SYSTEM DESCRIPTION
1. DESCRIPTION
- The power steering system generates torque through the operation of the motor and the reduction gear installed on the column shaft in order to assist steering effort.
- The power steering ECU determines directions and the amount of assisting power in accordance with vehicle speed signals and signals from the torque sensor built into the steering column assembly. As a result, the power steering ECU adjusts the steering effort so that it is lighter during low speed driving and heavier during high speed driving.
(a) Power steering ECU:
The power steering ECU calculates assisting power based on steering torque signals from the torque sensor and vehicle speed signals from the brake actuator assembly (skid control ECU).
(b) Torque sensor:
The torque sensor detects the steering effort generated when the steering wheel is turned and converts it to an electrical signal.
(c) Power steering motor:
The power steering motor is activated by the current from the power steering ECU and generates torque to assist the steering effort.
(d) Motor rotation angle sensor:
The motor rotation angle sensor consists of the resolver sensor, which excels in reliability and durability. The rotation angle sensor detects the rotation angle of the motor and outputs it to the power steering ECU. As a result, it ensures efficient EPS control.
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the power steering system.
*: Use the Techstream.
PROCEDURE
1.
VEHICLE BROUGHT ...
Calibration
CALIBRATION
1. ROTATION ANGLE SENSOR INITIALIZATION AND TORQUE SENSOR ZERO POINT CALIBRATION
NOTICE:
Clear the rotation angle sensor calibration value, initialize the rotation angle
sensor, and c ...
Other materials about Toyota Venza:
Steering Angle Sensor Circuit Malfunction (C1231/31)
DESCRIPTION
The steering angle sensor signal is sent to the skid control ECU via the CAN
communication system. When there is a malfunction in the CAN communication system,
it will be detected by the steering angle sensor zero point malfunction diagnostic ...
Fail-safe Chart
FAIL-SAFE CHART
1. Fail-safe
This function minimizes the loss of operation when any abnormality occurs in
a sensor or solenoid.
Fail-safe Control List
Malfunction Part
Function
Input Turbine Speed Sensor
...
Inspection
INSPECTION
PROCEDURE
1. INSPECT COMPRESSOR WITH PULLEY (SOLENOID VALVE)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
Condition
...
0.1154