Toyota Venza: Stereo Component Amplifier Malfunction (B15A3)

Toyota Venza Service Manual / Navigation / Multi Info Display / Navigation System / Stereo Component Amplifier Malfunction (B15A3)

DESCRIPTION

This DTC is stored when a malfunction occurs in the stereo component amplifier assembly.

DTC No.	DTC Detection Condition	Trouble Area
B15A3	When any of the following conditions is met: Internal power supply malfunction DSP error EEPROM error	Stereo component amplifier assembly

PROCEDURE

CHECK DTC

(a) Clear the DTCs (See page ).

(b) Recheck for DTCs and check that no DTCs are output.

OK:

No DTCs are output.

USE SIMULATION METHOD TO CHECK

REPLACE STEREO COMPONENT AMPLIFIER ASSEMBLY

AV Signal Stoppage (Low Battery Voltage) (B158F)

DESCRIPTION This DTC is stored when a video or audio signal is interrupted due to battery voltage input to the navigation receiver assembly dropping temporarily. DTC No. DTC ...

XM Tuner Malfunction (B15BA)

DESCRIPTION This DTC is stored when a malfunction occurs in the stereo component tuner assembly. DTC No. DTC Detection Condition Trouble Area B15BA ...

Other materials about Toyota Venza:

Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART HINT: If a trouble code is displayed during the DTC check, inspect the trouble areas listed below for that code. For details of the code, refer to the following "See page". Power back door system DTC C ...

Ultrasonic Sensor(for Front Side)
Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE FRONT BUMPER ASSEMBLY (See page ) 2. REMOVE NO. 1 ULTRASONIC SENSOR (a) Disengage the 2 claws to remove the No. 1 ultrasonic sensor. HINT: Use the same proc ...

Lost Communication with Automatic High Beam Sensor (B2432)
DESCRIPTION The DTC is stored when the AFS ECU (headlight swivel ECU assembly) detects malfunctions in the LIN communication system. DTC No. DTC Detection Condition Trouble Area B2432 Malfunction ...