Toyota Venza manuals

Toyota Venza: Speed Sensor(when Not Using The Engine Support Bridge)

Toyota Venza Service Manual / U660e Automatic Transmission / Transaxle / Speed Sensor(when Not Using The Engine Support Bridge)

Components

COMPONENTS

ILLUSTRATION


Removal

REMOVAL

PROCEDURE

1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

HINT:

See the steps from "Remove Engine Assembly with transaxle" through "Remove Automatic Transaxle Assembly" (See page ).


2. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY


3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY


4. REMOVE TRANSMISSION VALVE BODY ASSEMBLY


5. REMOVE SPEED SENSOR

(a) Disconnect the speed sensor connector.

(b) Remove the 2 bolts and speed sensor from the transmission valve body assembly.


Installation

INSTALLATION

PROCEDURE

1. INSTALL SPEED SENSOR

(a) Coat the 2 bolts with ATF.


(b) Install the speed sensor to the transmission valve body assembly with the 2 bolts.

Torque:

11 N·m {112 kgf·cm, 8 ft·lbf}

(c) Connect the speed sensor connector.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY


3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY


4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY


5. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY

HINT:

See the steps from "Install Automatic Transaxle Assembly" through "Install Engine Assembly with Transaxle" (See page ).


Reassembly
REASSEMBLY PROCEDURE 1. INSTALL SHIFT LOCK CONTROL COMPUTER SUB-ASSEMBLY (a) Engage the 3 claws to install the shift lock control computer sub-assembly. ...

Speed Sensor(when Using The Engine Support Bridge)
Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY See page 2. REMOVE SPEED SENSOR (a) Disconnect the speed sensor connector. ...

Other materials about Toyota Venza:

Stereo Component Amplifier Disconnected (B15D3)
DESCRIPTION The navigation receiver assembly and stereo component amplifier assembly are connected via AVC-LAN communication. This DTC is stored when an AVC-LAN communication error occurs between the navigation receiver assembly and stereo component ampl ...

Do-it-yourself service precautions
If you perform maintenance yourself, be sure to follow the correct procedure given in these sections. CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid de ...

Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY (a) Install the No. 3 parking brake cable assembly with the bolt and 4 nuts. Torque: Nut (A) : 5.4 N·m {55 kgf·cm, 48 in·lbf} Nut (B) : 6.0 N·m {61 kgf·cm, 53 in·lbf} Bolt ...

© 2016-2024 Copyright www.tovenza.com

0.1471