DESCRIPTION
These DTCs are stored when a malfunction occurs in the navigation antenna assembly.
DTC No. |
DTC Detection Condition |
Trouble Area |
---|---|---|
B15C0 |
Navigation antenna malfunction |
|
B15C1 |
Navigation antenna power source malfunction |
CAUTION / NOTICE / HINT
NOTICE:
Check that the navigation antenna assembly cable is properly installed and does not have any sharp bends, pinching or loose connections before performing the following inspection procedure (See page ).
PROCEDURE
1. |
CHECK DTC |
(a) Clear the DTCs (See page ).
(b) Recheck for DTCs and check that no DTCs are output.
OK:
No DTCs are output.
OK |
USE SIMULATION METHOD TO CHECK |
|
2. |
INSPECT NAVIGATION ANTENNA ASSEMBLY |
(a) Remove the navigation antenna assembly (See page ).
(b) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|
|
*a |
Component without harness connected (Navigation Antenna Assembly) |
OK |
REPLACE NAVIGATION RECEIVER ASSEMBLY |
NG |
REPLACE NAVIGATION ANTENNA ASSEMBLY |
Center Power Outlet Socket
Components
COMPONENTS
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL CENTER POWER OUTLET SOCKET COVER
(a) Engage the 2 claws to install the center power outlet socket cover.
2 ...
Headlight switch
The headlights can be operated manually or automatically.
Turning the end of the lever turns on the lights as follows.
Type A
The daytime running lights turn
on.
The headlights, parking lights, daytime running lights and so on turn on and
off auto ...
Check CAN Bus Lines for Short Circuit
DESCRIPTION
There may be a short circuit in the CAN bus main wire and/or CAN branch wire
when the resistance between terminals 6 (CANH) and 14 (CANL) of the DLC3 is below
54 Ω.
Symptom
Trouble Area
Resistance betwe ...