Toyota Venza: Security Horn Assembly
Removal
REMOVAL
PROCEDURE
1. REMOVE SECURITY HORN ASSEMBLY
|
(a) Remove the bolt and disconnect the security horn assembly. |
|
|
(b) Disconnect the connector and remove the security horn assembly. |
|
Inspection
INSPECTION
PROCEDURE
1. INSPECT SECURITY HORN ASSEMBLY
|
(a) Check the operation of the security horn assembly. Standard:
If the result is not as specified, replace the security horn assembly. |
|
Installation
INSTALLATION
PROCEDURE
1. INSTALL SECURITY HORN ASSEMBLY
|
(a) Connect the connector. |
|
.png)
|
(b) Install the security horn assembly with the bolt. Torque: 8.0 N·m {82 kgf·cm, 71 in·lbf} |
|
.png)
Installation
INSTALLATION
PROCEDURE
1. INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY
(a) Insert the front end of the front door outside handle assembly into
the front door outside handle frame.
...
Other materials about Toyota Venza:
Transmitter Battery(w/o Smart Key System)
Replacement
REPLACEMENT
PROCEDURE
1. REMOVE TRANSMITTER HOUSING COVER
(a) Using a precision screwdriver with its tip wrapped in protective
tape, pry open the transmitter housing cover.
NOTICE:
Do not forcibly pry the cover.
HINT:
...
Driver Side Door Entry Lock and Unlock Functions do not Operate
DESCRIPTION
When the entry lock and unlock functions do not operate only for the driver door,
an error in output request codes from the driver door or malfunction in the front
door outside handle assembly is suspected. If the entry functions for the other ...
Auto Up Operation does not Fully Close Power Window (Jam Protection Function
is Activated)
DESCRIPTION
If a door glass or a power window regulator motor assembly does not operate smoothly,
the jam protection function may be triggered automatically, resulting in the auto
up function being unable to fully close the window.
HINT:
This symptom ma ...
0.1486