Components
COMPONENTS
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY
(a) Engage the clamp and install the seat heater control sub-assembly. |
|
(b) Connect the connector.
2. INSTALL FRONT SEAT ASSEMBLY
3. INSTALL FRONT SEAT REAR INNER TRACK COVER
4. INSTALL FRONT SEAT REAR OUTER TRACK COVER
5. INSTALL FRONT SEAT HEADREST ASSEMBLY
6. INSPECT FRONT SEAT ASSEMBLY
7. INSPECT SRS WARNING LIGHT
(See page )
Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT SEAT HEADREST ASSEMBLY
2. REMOVE FRONT SEAT REAR OUTER TRACK COVER
3. REMOVE FRONT SEAT REAR INNER TRACK COVER
4. REMOVE FRONT SEAT ASSEMBLY
5. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY
(a) Disconnect the connector. |
|
(b) Disengage the clamp and remove the seat heater control sub-assembly.
Passenger Airbag ON/OFF Indicator Circuit Malfunction (B1660/43)
DESCRIPTION
The passenger airbag ON/OFF indicator circuit consists of the center airbag sensor
assembly and accessory meter assembly (passenger airbag ON/OFF indicator).
The passenger airbag ON/OFF indicator indicates the operation condition of the
front ...
Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT WIPER ARM HEAD CAP
(a) Using a screwdriver, remove the 2 front wiper arm head caps as shown
in the illustration.
Text in Illustration
*1
Protective Tape
...
Inspection
INSPECTION
PROCEDURE
1. INSPECT DRIVE MONITOR SWITCH
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
Switch Condition
Specif ...