Toyota Venza: Replacing a flat tire

Toyota Venza Owners Manual / When trouble arises / Steps to take in an emergency / If you have a flat tire / Replacing a flat tire

Chock the tires.

Slightly loosen the wheel nuts (one turn).

Turn the tire jack portion “A” by hand until the notch of the jack is in contact with the jack point.

Raise the vehicle until the tire is slightly raised off the ground.

Remove all the wheel nuts and the tire.

When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.

Taking out the spare tire

Loosen the center fastener that secures the spare tire. ...

Installing the spare tire

Remove any dirt or foreign matter from the wheel contact surface. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may com ...

Other materials about Toyota Venza:

Front Occupant Classification Sensor RH Circuit Malfunction (B1781)
DESCRIPTION The front occupant classification sensor RH circuit consists of the occupant classification ECU and front occupant classification sensor RH. DTC B1781 is recorded when a malfunction is detected in the front occupant classification sensor RH c ...

Installing child restraints
Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if y ...

Rear Power Window RH does not Operate with Rear Power Window Switch RH
DESCRIPTION When the engine is running or the ignition switch is ON, the power window regulator motor assembly (for rear RH side) is operated by the power window regulator switch assembly (for rear RH side). The power window regulator motor assembly (for ...