Toyota Venza manuals

Toyota Venza: Removal

REMOVAL

PROCEDURE

1. REMOVE RADIATOR ASSEMBLY AND FAN ASSEMBLY WITH MOTOR

HINT:

See page


2. REMOVE FAN

(a) Remove the nut and fan.


3. REMOVE NO. 2 FAN

(a) Remove the nut and No. 2 fan.


4. REMOVE COOLING FAN MOTOR INSULATOR

(a) Remove the 2 bolts and cooling fan motor insulator.


5. REMOVE COOLING FAN MOTOR

(a) Remove the 3 screws and cooling fan motor.


6. REMOVE NO. 2 COOLING FAN MOTOR

(a) Disconnect the No. 2 cooling fan motor connector and 2 clamps.


(b) Remove the 3 screws and No. 2 cooling fan motor.


On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT COOLING FAN MOTOR (a) Check that the motor operates smoothly when the battery is connected to the cooling fan motor connector. Text in I ...

Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 2 COOLING FAN MOTOR (a) Install the No. 2 cooling fan motor with the 3 screws. Torque: w/o Towing package : 2.6 N·m {26 kgf·cm, 23 in· ...

Other materials about Toyota Venza:

Operation Check
OPERATION CHECK 1. CHECK BASIC FUNCTIONS (a) When the back door is partially closed, check that the motor operates to fully close (lock) the back door. (b) Check that the back door can be opened. (c) When the back door is partially closed and then the mo ...

Clearance Warning Buzzer
Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE FRONT DOOR SCUFF PLATE LH 2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH 3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL 4. REMOVE NO. 1 CLEARANCE WARNING BUZZER ...

Precaution
PRECAUTION NOTICE: When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected. System Name See Procedure Back Door Closer System ...

© 2016-2024 Copyright www.tovenza.com

0.183