Toyota Venza: Removal

Toyota Venza Service Manual / U660e Automatic Transmission / Transaxle / Valve Body Assembly(when Using The Engine Support Bridge) / Removal

REMOVAL

PROCEDURE

1. DRAIN AUTOMATIC TRANSAXLE FLUID

2. REMOVE FRONT FRAME ASSEMBLY

See page

3. SUPPORT ENGINE ASSEMBLY

4. REMOVE BELT

5. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

(a) Remove the 18 bolts and automatic transaxle oil pan sub-assembly from the automatic transaxle assembly.

NOTICE:

Some fluid will remain in the automatic transaxle oil pan sub-assembly. Remove all the bolts, and carefully remove the automatic transaxle oil pan sub-assembly.

6. REMOVE AUTOMATIC TRANSAXLE OIL PAN GASKET

(a) Remove the automatic transaxle oil pan gasket from the automatic transaxle oil pan sub-assembly.

7. REMOVE TRANSMISSION OIL CLEANER MAGNET

(a) Remove the 2 transmission oil cleaner magnets from the automatic transaxle oil pan sub-assembly.

Text in Illustration

*1	Transmission Oil Cleaner Magnet

8. INSPECT TRANSMISSION OIL CLEANER MAGNET

9. REMOVE VALVE BODY OIL STRAINER ASSEMBLY

(a) Remove the 2 bolts and valve body oil strainer assembly from the transmission valve body assembly.

(b) Remove the O-ring from the valve body oil strainer assembly.

Text in Illustration

O-ring

10. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

(a) Remove the 11 bolts and transmission valve body assembly from the automatic transaxle assembly.

NOTICE:

When removing the transmission valve body assembly, be careful not to allow the speed sensor and the automatic transaxle assembly to interfere with each other.

11. REMOVE MANUAL VALVE

(a) Remove the manual valve from the transmission valve body assembly.

Components

COMPONENTS ILLUSTRATION ILLUSTRATION ...

Disassembly

DISASSEMBLY PROCEDURE 1. REMOVE TRANSMISSION WIRE 2. REMOVE ATF TEMPERATURE SENSOR ASSEMBLY (a) Remove the 4 bolts, ATF temperature sensor assembly and clamp from the valve body ...

Other materials about Toyota Venza:

Intake Air Control Valve Actuator(for Tcv)
Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE INTAKE MANIFOLD (a) Remove the intake manifold (See page ). 2. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR (for TCV) (a) Remove the 2 bolts, intake air control valve actuator a ...

Wireless Door Lock Tuner Circuit Malfunction (B1242)
DESCRIPTION The door control receiver receives signals from the transmitter and sends these signals to the main body ECU (driver side junction block assembly). DTC No. DTC Detection Condition Trouble Area B ...

Relay
On-vehicle Inspection ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT TAILLIGHT RELAY (TAIL) (a) Remove the taillight relay from the main body ECU (driver side junction block assembly). (b) Measur ...