REMOVAL
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).
2. REMOVE REAR WHEEL
3. REMOVE REAR DOOR SCUFF PLATE LH
4. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
5. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
6. REMOVE DECK BOARD ASSEMBLY
7. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY
8. REMOVE DECK SIDE TRIM BOX LH
9. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY
10. REMOVE DECK SIDE TRIM BOX RH
11. REMOVE NO. 1 DECK BOARD
12. REMOVE REAR SEAT SUB FLOOR PANEL ASSEMBLY
13. REMOVE REAR FLOOR FINISH PLATE
14. REMOVE RECLINING REMOTE CONTROL BEZEL LH
15. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY
16. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY LH
17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
18. REMOVE REAR SPEED SENSOR
(a) Disconnect the rear speed sensor connector. Text in Illustration
|
|
(b) Disconnect the grommet of the rear speed sensor wire from the hole of the wheel house. Text in Illustration
|
|
(c) Remove the 2 bolts, No. 1 clamp and No. 2 clamp from the body and absorber.
(d) Remove the bolt and rear speed sensor from the carrier. NOTICE: Keep the sensor tip and rear speed sensor installation hole free from foreign matter. |
|
Installing child restraints
Follow the child restraint system manufacturer’s instructions. Firmly secure
child restraints to the rear seats using the LATCH anchors or a seat belt. Attach
the top tether strap when installing a child restraint.
The lap/shoulder belt can be used if y ...
Lost Communication with Clearance Warning ECU (U1110)
DESCRIPTION
DTC Code
DTC Detection Condition
Trouble Area
U1110
No communication from the clearance warning ECU assembly continues.
Clearance warning ECU assembly branch wire o ...
Brake Switch "A" / "B" Correlation (P0504)
DESCRIPTION
The stop light switch is a duplex system that transmits 2 signals: STP and ST1-.
These 2 signals are used by the ECM to monitor whether or not the brake system is
working properly. If signals which indicate the brake pedal is being depressed a ...