Toyota Venza: Removal

Toyota Venza Service Manual / Seat Belt / Rear Center Seat Outer Belt Assembly / Removal

REMOVAL

PROCEDURE

1. REMOVE REAR SEAT HEADREST ASSEMBLY

2. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

3. REMOVE REAR SEAT INNER TRACK BRACKET COVER

4. REMOVE REAR SEAT OUTER TRACK BRACKET COVER

5. DISCONNECT REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY

6. REMOVE REAR SEAT ASSEMBLY RH

7. REMOVE SEAT ADJUSTER COVER CAP RH

8. REMOVE REAR SEAT RECLINING RELEASE LEVER RH

9. REMOVE REAR SEAT RECLINING COVER RH

10. REMOVE CENTER SEAT HINGE COVER RH

11. REMOVE REAR SEAT INNER RECLINING COVER RH

12. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY

13. REMOVE REAR SEAT CUSHION COVER WITH PAD

14. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

(a) Remove the bolt and disconnect the rear center seat outer belt assembly.

15. REMOVE REAR SEATBACK BOARD RH

16. REMOVE REAR SEAT SHOULDER BELT COVER

(a) Remove the screw.

(b) Disengage the 2 guides and disconnect the rear seatback upper lock bezel as shown in the illustration.

17. REMOVE REAR SEAT HEADREST SUPPORT LH

18. REMOVE REAR SEAT HEADREST SUPPORT RH

19. REMOVE REAR SEAT CENTER HEADREST SUPPORT LH

20. REMOVE REAR SEAT CENTER HEADREST SUPPORT RH

21. REMOVE REAR SEATBACK COVER WITH PAD

22. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY

(a) Remove the bolt, nut, and the rear center seat outer belt assembly.

Components

COMPONENTS ILLUSTRATION ILLUSTRATION ILLUSTRATION ...

Installation

INSTALLATION PROCEDURE 1. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY (a) Install the rear center seat outer belt assembly with the bolt and nut. Torque: Bolt : 7.5 N·m ...

Other materials about Toyota Venza:

Automatic High Beam System (B124B)
DESCRIPTION The DTC is stored when the main body ECU (driver side junction block assembly) detects malfunctions in the automatic high beam system. DTC No. DTC Detection Condition Trouble Area B124B ...

Precaution
PRECAUTION 1. EXPRESSIONS OF IGNITION SWITCH The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section. Expression Switc ...

Charge Warning Light Comes ON while Driving
PROCEDURE 1. CHECK LOCK FUNCTION OF CLUTCH PULLEY (a) Check the lock function with the pulley installed in the vehicle. (1) Visually check that the rotor in the generator operates with the engine started. (b) Check the lock ...