Toyota Venza: Removal

Toyota Venza Service Manual / Seat / Front Seat Cushion Heater / Removal

REMOVAL

PROCEDURE

1. REMOVE FRONT SEAT HEADREST ASSEMBLY

2. REMOVE FRONT SEAT REAR OUTER TRACK COVER

3. REMOVE FRONT SEAT REAR INNER TRACK COVER

4. REMOVE FRONT SEAT ASSEMBLY

5. REMOVE RECLINING POWER SEAT SWITCH KNOB

6. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

7. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY

8. REMOVE FRONT SEAT INNER BELT ASSEMBLY

9. REMOVE FRONT INNER SEAT CUSHION SHIELD

10. REMOVE POWER SEAT SWITCH

11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

(a) Remove the 18 hog rings and the separate type front seat cushion cover.

(b) Cut off the 25 tack pins that fasten the seat heater, and then remove the separate type front seat cushion heater assembly from the separate type front seat cushion cover.

Components

COMPONENTS ILLUSTRATION ILLUSTRATION ILLUSTRATION ...

Inspection

INSPECTION PROCEDURE 1. INSPECT FRONT SEAT CUSHION HEATER LH (a) Check the seat cushion heater. (1) Apply battery voltage and check the seat cushion heater. OK: ...

Other materials about Toyota Venza:

Reassembly
REASSEMBLY PROCEDURE 1. INSTALL REAR CONSOLE ARMREST ASSEMBLY (a) Temporarily install the rear console armrest assembly. (b) Push in the box door hinge shafts by hand as far as possible. HINT: The illustration is for the LH sid ...

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE TRANSPONDER KEY ECU ASSEMBLY (w/ Engine Immobiliser System) 2. REMOVE NO. 1 FINISH PANEL MOUNTING BRACKET (a) Remove the 2 bolts and 2 No. 1 finish panel mounting brackets as shown in the illustration. ...

Components
COMPONENTS ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ...