REMOVAL
PROCEDURE
1. REMOVE FRONT WIPER ARM HEAD CAP
(a) Using a screwdriver, remove the 2 front wiper arm head caps as shown in the illustration. Text in Illustration
HINT: Tape the screwdriver tip before use. |
|
2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH
(a) Remove the nut and the front wiper arm and blade assembly LH. |
|
3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH
(a) Remove the nut and the front wiper arm and blade assembly RH. |
|
4. REMOVE FRONT FENDER TO COWL SIDE SEAL LH
(a) Disengage the claw and 2 guides and remove the front fender to cowl side seal LH. |
|
5. REMOVE FRONT FENDER TO COWL SIDE SEAL RH
HINT:
Use the same procedure for the RH side and LH side.
6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
(a) Using a clip remover, remove the 2 clips. |
|
(b) Disengage the 13 claws and pull out the cowl top ventilator louver sub-assembly as shown in the illustration. |
|
7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Disconnect the connector. |
|
(b) Remove the 3 bolts and the windshield wiper motor and link assembly as shown in the illustration. |
|
8. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
(a) Using a screwdriver, disengage the windshield wiper link rod from the crank arm pivot of the front wiper motor assembly as shown in the illustration. Text in Illustration
HINT: Tape the screwdriver tip before use. |
|
(b) Using a T30 "TORX" socket wrench, remove the 2 bolts and the windshield wiper motor assembly from the windshield wiper link assembly. |
|
System Description
SYSTEM DESCRIPTION
1. GENERAL
The rear window defogger wires are attached to the inside of the rear window
and defog the window surface quickly by pressing the rear window defogger switch
on the air conditioning control assembly. The indicator light is i ...
Inspection
INSPECTION
PROCEDURE
1. INSPECT UNLOCK WARNING SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
Condition
Specified Condition
...
Seat heaters
1. For driver’s seat
2. For front passenger’s seat
3. On
The indicator light comes on.
4. Adjusts the seat temperature
The further you turn the dial upward, the warmer the seat becomes.
- The seat heaters can be used when
►Vehicles wit ...