REASSEMBLY
PROCEDURE
1. INSTALL SHIFT SOLENOID VALVE SL4
(a) Coat the shift solenoid valve SL4 and bolt with ATF. Text in Illustration
|
|
(b) Install the shift solenoid valve SL4 and lock plate to the valve body assembly with the bolt.
Torque:
11 N·m {112 kgf·cm, 8 ft·lbf}
2. INSTALL SHIFT SOLENOID VALVE SL3
(a) Coat the shift solenoid valve SL3 and bolt with ATF. Text in Illustration
|
|
(b) Install the shift solenoid valve SL3 and lock plate to the valve body assembly with the bolt.
Torque:
11 N·m {112 kgf·cm, 8 ft·lbf}
3. INSTALL SHIFT SOLENOID VALVE SL1
(a) Coat the shift solenoid valve SL1 with ATF. Text in Illustration
|
|
(b) Install the shift solenoid valve SL1 to the valve body assembly.
4. INSTALL SHIFT SOLENOID VALVE SL2
(a) Coat the shift solenoid valve SL2 and bolt with ATF.
(b) Install the shift solenoid valve SL2 and lock plate to the valve body assembly with the bolt.
Torque:
11 N·m {112 kgf·cm, 8 ft·lbf}
5. INSTALL SHIFT SOLENOID VALVE SLU
(a) Coat the shift solenoid valve SLU with ATF. Text in Illustration
|
|
(b) Install the shift solenoid valve SLU to the valve body assembly.
6. INSTALL SHIFT SOLENOID VALVE SLT
(a) Coat the shift solenoid valve SLT with ATF.
(b) Install the shift solenoid valve SLT and lock plate to the valve body assembly.
7. INSTALL SHIFT SOLENOID VALVE SL
(a) Coat the shift solenoid valve SL with ATF. |
|
(b) Install the shift solenoid valve SL to the valve body assembly.
8. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY
(a) Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly. Text in Illustration
|
|
(b) Coat the 4 bolts with ATF. Text in Illustration
|
|
(c) Install the ATF temperature sensor assembly and clamp to the valve body assembly with the 4 bolts.
Torque:
11 N·m {112 kgf·cm, 8 ft·lbf}
Bolt length:
Bolt A
25 mm (0.984 in.)
Bolt B
85 mm (3.35 in.)
9. INSTALL TRANSMISSION WIRE
Removal
REMOVAL
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-)
battery terminal to disable the SRS system (See page
).
NOTICE:
When disconnecting the cable, s ...
Data List / Active Test
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches,
sensors, actuators and other items to be read without removing any parts. This non-intrusive
inspection can be very useful bec ...
Removal
REMOVAL
PROCEDURE
1. REMOVE REAR SEAT HEADREST ASSEMBLY
(a) Press the headrest support button and pull up the headrest as shown
in the illustration to remove it.
2. REMOVE REAR SEAT INNER TRACK ...