Toyota Venza: Reassembly

Toyota Venza Service Manual / U660e Automatic Transmission / Transaxle / Oil Pump / Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL FRONT OIL PUMP OIL SEAL

(a) Using SST and a hammer, install a new oil seal to the oil pump body.

SST: 09350-32014

09351-32140

Oil seal driven in depth:

-0.25 to 0.25 mm (-0.00984 to 0.00984 in.)

(b) Coat the lip of the oil seal with MP grease.

2. INSTALL FRONT OIL PUMP BODY O-RING

(a) Coat a new O-ring with ATF and install it to the oil pump body.

NOTICE:

Ensure that the O-ring is not twisted.

3. INSTALL FRONT OIL PUMP DRIVEN GEAR

(a) Coat the front oil pump driven gear with ATF and install it to the oil pump body with the marked side up.

4. INSTALL FRONT OIL PUMP DRIVE GEAR

(a) Coat the front oil pump drive gear with ATF, and install it to the oil pump body with the marked side up.

5. INSTALL STATOR SHAFT ASSEMBLY

(a) Align each knock pin of the stator shaft with the holes in the oil pump body and install the stator shaft to the oil pump body.

(b) Using a "TORX" socket (T30), install the 16 bolts.

Torque:

9.3 N·m {95 kgf·cm, 82 in·lbf}

-	Bolt Length
Bolt A	14 mm (0.551 in.)
Bolt B	26 mm (1.02 in.)

6. INSPECT FRONT OIL PUMP AND GEAR BODY SUB-ASSEMBLY

Inspection

INSPECTION PROCEDURE 1. INSPECT FRONT OIL PUMP AND GEAR BODY SUB-ASSEMBLY (a) Turn the drive gear with 2 screwdrivers and make sure that it rotates smoothly. NOTICE: Be careful ...

Park / Neutral Position Switch

...

Other materials about Toyota Venza:

Vehicle load limits
Vehicle load limits include total load capacity, seating capacity, Trailer Weight Rating (TWR) and cargo capacity. - Total load capacity (Vehicle capacity weight): Total load capacity means the combined weight of occupants, cargo and luggage. &nbs ...

Screen Flicker or Color Distortion
PROCEDURE 1. CHECK DISPLAY SETTING (a) Reset display settings (contrast, brightness) and check that the screen appears normal. OK: The display returns to normal. OK END NG ...

Front Passenger Side Door Entry Lock and Unlock Functions do not Operate
DESCRIPTION When the entry lock and unlock functions do not operate only for the front passenger door, an error in output request codes from the front passenger door or malfunction in the front door outside handle assembly is suspected. If the entry funct ...