REASSEMBLY
PROCEDURE
1. INSTALL NO. 1 INSTRUMENT PANEL PIN
(a) Install the 2 No. 1 instrument panel pins with the 2 screws <E> or <F>. |
|
2. INSTALL GLOVE BOX LIGHT ASSEMBLY
(a) Engage the 2 claws to install the glove box light assembly. |
|
3. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
4. INSTALL NO. 3 INSTRUMENT PANEL WIRE
(a) Engage the 4 clamps to install the No. 3 instrument panel wire. |
|
5. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)
6. INSTALL NO. 1 ANTENNA CORD SUB-ASSEMBLY
7. INSTALL HEATER TO REGISTER DUCT
(a) Install the heater to register duct with the 7 screws <E> or <F>.
8. INSTALL DEFROSTER NOZZLE ASSEMBLY
(a) Install the defroster nozzle assembly with the 4 screws <E> or <F>. |
|
9. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT
(a) Install the No. 2 side defroster nozzle duct with the 2 screws <E> or <F>. |
|
10. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT
(a) Install the No. 1 side defroster nozzle duct with the 2 screws <E> or <F>. |
|
Brake Switch "B" Circuit High (P0724)
DESCRIPTION
The purpose of this circuit is to prevent the engine from stalling when brakes
are suddenly applied while driving in lock-up condition.
When the brake pedal is depressed, the stop light switch sends a signal to the
ECM. Then the ECM cancels t ...
Inspection
INSPECTION
PROCEDURE
1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY
(a) Inspect operation of the electrochromic inner mirror.
(1) Connect a positive (+) lead from the battery to terminal 1 and a negative
(-) lead to terminal 2.
(2) Press the AUTO switch.
...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the power window control
system.
*: Use the Techstream.
PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
...