Toyota Venza: Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL COOLER DRYER
|
(a) Using pliers, install a new cooler dryer to the modulator. |
|
.png)
|
(b) Apply sufficient compressor oil to the O-ring and fitting surfaces of the cap. Compressor oil: ND-OIL 8 or equivalent |
|
|
(c) Using a 14 mm straight hexagon wrench, install the cap to the cooler condenser core. NOTICE: Keep the O-rings and O-ring fitting surfaces clean from dirt or any foreign objects. Torque: 2.9 N·m {30 kgf·cm, 26 in·lbf} Text in Illustration
|
|
.png)
Installation
INSTALLATION
PROCEDURE
1. INSTALL COOLER CONDENSER ASSEMBLY
(a) Install the cooler condenser assembly with the 4 bolts.
Torque:
6.0 N·m {61 kgf·cm, 53 in·lbf}
HINT:
If th ...
Front Blower Motor
Components
COMPONENTS
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY
(a) Install the front blower motor sub-assembly with the 3 scr ...
Other materials about Toyota Venza:
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
NOTICE:
After replacing the stereo component tuner assembly of vehicles subscribed to
pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS
System).
HINT:
Use the table below to help determi ...
Glossary of tire terminology
...
Occupant Classification System Malfunction (B1650/32)
DESCRIPTION
The occupant classification system circuit consists of the center airbag sensor
assembly and occupant classification system.
If the center airbag sensor assembly receives signals from the occupant classification
ECU, it determines whether the ...
0.1532