REASSEMBLY
PROCEDURE
1. INSTALL NO. 1 REAR BUMPER REINFORCEMENT
(a) Install the No. 1 rear bumper reinforcement with the 6 nuts. Torque: 68 N·m {693 kgf·cm, 50 ft·lbf} |
|
2. INSTALL REAR BUMPER ENERGY ABSORBER
(a) Engage the 2 guides to install the rear bumper energy absorber. |
|
3. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH
(a) Engage the 2 claws and install the No. 2 rear bumper side support LH. |
|
(b) Install the screw.
4. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH
HINT:
Use the same procedure for the RH side and LH side.
5. INSTALL REAR BUMPER SIDE RETAINER LH
(a) Engage the 2 claws and install the rear bumper side retainer LH. |
|
(b) Install the screw.
6. INSTALL REAR BUMPER SIDE RETAINER RH
HINT:
Use the same procedure for the RH side and LH side.
7. INSTALL REAR BUMPER SPOILER LH (for 1AR-FE)
(a) Install the rear bumper spoiler LH with the screw. Text in Illustration
|
|
(b) Install the clip and outside moulding retainer.
8. INSTALL REFLEX REFLECTOR ASSEMBLY LH
(a) Engage the guide. |
|
(b) Install the reflex reflector assembly LH with the screw.
9. INSTALL REFLEX REFLECTOR ASSEMBLY RH
HINT:
Use the same procedure for the RH side and LH side.
10. INSTALL REAR BUMPER WIRE (w/ Intuitive Parking Assist System)
11. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)
12. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
13. INSTALL ULTRASONIC SENSOR CLIP (w/ Intuitive Parking Assist System)
If you have a flat tire
Remove the flat tire and replace it with the spare provided. - Before
jacking up the vehicle
• Stop the vehicle on a hard, flat surface.
• Set the parking brake.
• Shift the shift lever to “P”.
• Stop the engine.
• Turn on the emergency f ...
Data List / Active Test
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches,
sensors, actuator and other items to be read without removing any parts. This non-intrusive
inspection can be very useful beca ...
Internal Control Module Throttle Position Performance (P060E)
MONITOR DESCRIPTION
The ECM monitors the input signals of the throttle position sensor No. 1 and
stop light switch. As the ECM monitors the input signals of the throttle position
sensor No. 1 and the STP signals of the stop light switch, if the input sign ...