Toyota Venza: Reassembly

Toyota Venza Service Manual / Door / Hatch / Hood / Reassembly

REASSEMBLY

PROCEDURE

1. CONNECT WASHER HOSE ASSEMBLY

(a) Engage the 5 clips and connect the washer hose assembly.

2. INSTALL FRONT WASHER NOZZLE SUB-ASSEMBLY

3. INSPECT FRONT WASHER NOZZLE SUB-ASSEMBLY

4. ADJUST FRONT WASHER NOZZLE SUB-ASSEMBLY

5. INSTALL HOOD INSULATOR

(a) Engage the 2 claws.

(b) Install the hood insulator with the 10 clips.

6. INSTALL HOOD TO RADIATOR SUPPORT SEAL

(a) Engage the 10 clips and install the hood to radiator support seal.

Adjustment

ADJUSTMENT CAUTION / NOTICE / HINT HINT: Centering bolts are used to mount the hood hinge and hood lock. The hood and hood lock cannot be adjusted with the centering bolts installed. ...

Hood Lock Control Cable Assembly

...

Other materials about Toyota Venza:

Tire size
- Typical tire size information The illustration indicates typical tire size. 1. Tire use (P = Passenger car, T = Temporary use) 2. Section width (millimeters) 3. Aspect ratio (tire height to section width) 4. Tire construction code (R = Radial ...

Diagnosis System
DIAGNOSIS SYSTEM 1. DESCRIPTION (a) Data of the system can be read from the Data Link Connector 3 (DLC3) of the vehicle. Therefore, when the system seems to be malfunctioning, use the Techstream to check for a malfunction and repair it. 2. CHECK DLC3 ( ...

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. CHECK THROTTLE BODY ASSEMBLY (a) Check the throttle control motor operating sounds. (1) Turn the ignition switch to ON. (2) When pressing the accelerator pedal, check the operating sound of the running motor. Make sure ...