Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE COOL AIR INTAKE DUCT SEAL
2. REMOVE RADIATOR GRILLE
(a) Put protective tape around the radiator grille. Text in Illustration
|
|
(b) Remove the 2 bolts. |
|
(c) Using a clip remover, remove the 3 clips. |
|
(d) Disengage the 6 claws and remove the radiator grille.
Installation
INSTALLATION
PROCEDURE
1. INSTALL RADIATOR GRILLE
(a) Engage the 6 claws.
(b) Install the 3 clips.
(c) Install the radiator grille with the 2 bolts.
2. INSTALL COOL AIR INTAKE DUCT SEAL
Installation
INSTALLATION
PROCEDURE
1. INSPECT TORQUE CONVERTER ASSEMBLY
2. INSTALL TORQUE CONVERTER ASSEMBLY
(a) Engage the splines of the input shaft and turbine runner.
(b) Engage the splines o ...
Lost Communication with Gateway Module (MS Bus) (U1002)
DESCRIPTION
The main body ECU will store this DTC when no signals can be received
from the ECUs that have been memorized as those that are connected to the
CAN MS bus.
When the main body ECU receives a response signal from the ECUs connecte ...
Radiator Grille
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE COOL AIR INTAKE DUCT SEAL
2. REMOVE RADIATOR GRILLE
(a) Put protective tape around the radiator grille.
Text in Illustration
*1
...