Toyota Venza: Problem Symptoms Table

• Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
• Inspect the fuses and relays related to this system before inspecting the suspected areas below.

On-vehicle Inspection

ON-VEHICLE INSPECTION PROCEDURE 1. CHECK BATTERY CONDITION NOTICE: If the battery is weak or if the engine is difficult to start, perform the following procedure. (a) Check the battery for dama ...

Charge Warning Light Comes ON while Driving

PROCEDURE 1. CHECK LOCK FUNCTION OF CLUTCH PULLEY (a) Check the lock function with the pulley installed in the vehicle. (1) Visually check that the rotor in the gene ...

Other materials about Toyota Venza:

Transponder Chip Malfunction (B2793)
DESCRIPTION This DTC is stored when a malfunction is found in the key during key code registration or a key code is not registered normally. Replace the key if the key code registration is not performed normally and this DTC is detected. DTC N ...

Precaution
PRECAUTION 1. PRECAUTION FOR DISCONNECTING THE BATTERY CABLE NOTICE: When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the terminal is reconnected. System Name See Procedure ...

Removal
REMOVAL PROCEDURE 1. REMOVE FRONT WHEEL LH 2. REMOVE FRONT FENDER OUTSIDE MOULDING LH 3. REMOVE FRONT FENDER LINER LH (a) Using a screwdriver, turn the pin 90 degrees and remove the 2 pin hold clips. Text in Illustration ...