Toyota Venza: Precaution

Toyota Venza Service Manual / Mf1a Transfer / 4wd / Awd / Active Torque Control 4wd System / Precaution

PRECAUTION

1. PRECAUTION FOR DISCONNECTING THE BATTERY CABLE

NOTICE:

When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected:

System	See Procedure
Back Door Closer System
Power Back Door System

2. TROUBLESHOOTING PRECAUTION

NOTICE:

Since the Active Torque Control 4WD system may be influenced by a malfunction in other systems, be sure to check for DTCs in the other systems.
When removing and installing the AWD control ECU and each sensor, be sure to check that the normal display is output in test mode inspection and in DTC output inspection after installing all the parts.
If the DTC of the CAN communication line is output, repair the malfunction in the communication line and troubleshoot the Active Torque Control 4WD system.
Since the CAN communication line has its own length and route, it cannot be repaired temporarily with a bypass wire, etc.

Active Torque Control 4wd System

...

Parts Location

PARTS LOCATION ILLUSTRATION ILLUSTRATION ...

Other materials about Toyota Venza:

CD cannot be Ejected
PROCEDURE 1. CHECK OPERATION (a) Press the disc eject switch of the radio and display receiver assembly for 5 seconds or more and check that the CD is ejected. OK: CD is ejected. NG REPLACE RADIO AND D ...

Adjustment
ADJUSTMENT CAUTION / NOTICE / HINT CAUTION: Before adjusting the door positions of vehicles equipped with side and curtain shield airbags, be sure to disconnect the battery. After adjustment, check that the SRS warning light is operating normally and ...

Back Door Entry Unlock Function does not Operate
DESCRIPTION If the entry back door open function does not operate but the back door entry lock function operates, the communication between the vehicle and key is normal. As a faulty part, the back door open switch circuit (from the back door opener switc ...