Toyota Venza: Precaution

NOTICE:

• Be sure to read the supplemental restraint system precautions thoroughly before servicing the brake system (See page ).


• Care must be taken to replace each part properly as it could affect the performance of the brake system and result in a driving hazard. Replace the parts with those having the same part number or equivalent.
• It is very important to keep parts and the area clean when repairing the brake system.
• If the vehicle is equipped with a mobile communication system, refer to Precaution in the introduction section (See page ).


• Care must be taken when using magnets as they could affect the performance of the speed sensors.
• Since the brake lines are critical safety related parts, be sure to disassemble and inspect the components if a brake fluid leak is found. If any abnormality is found, replace the component with a new one.
• When removing brake components, cover the brake line connections to prevent foreign matter such as dust or dirt from entering the lines.
• Do not damage or deform the brake lines during the removal and installation procedures.
• Do not allow brake fluid to adhere to any painted surface such as the vehicle body. If brake fluid leaks onto any painted surface, immediately wash it off.

Brake System

...

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of the problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in ord ...

Other materials about Toyota Venza:

Speedometer Malfunction
DESCRIPTION The meter CPU receives vehicle speed signals from the skid control ECU via the CAN communication system (CAN No. 1 Bus). The speed sensor detects the wheel speed and sends the appropriate signals to the skid control ECU. The skid control ECU ...

System Diagram
SYSTEM DIAGRAM Communication Table Transmitting ECU (Transmitter) Receiving ECU (Receiver) Signal Line Main body ECU (Driver side junction block assembly) Power Back Door ECU (P ...

Fail-safe Chart
FAIL-SAFE CHART If a problem occurs in the power steering system, the power steering assist will be stopped or the amount of power assist will be decreased to protect the system. Power Steering System Malfunction Fail-safe Operation ...