PRECAUTION
1. NOTICE FOR INITIALIZATION:
NOTICE:
When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.
System Name |
See Procedure |
---|---|
Back Door Closer System |
|
Power Back Door System |
2. PRECAUTIONS WHEN WORKING ON STEERING LOCK SYSTEM
(a) After replacing the steering lock ECU (steering lock actuator assembly), perform the key ID code registration.
(b) After replacing the steering lock ECU (steering lock actuator assembly), confirm the lock/unlock operation of the steering lock.
Operation Confirmation
Steering Lock Condition |
Operation Condition |
---|---|
Lock |
With the ignition switch off, open and close any door. |
Unlock |
Turn the ignition switch from off to ON or ACC. |
Evaporative Emission Control System Pressure Sensor Range / Performance (P0451-P0453)
DTC SUMMARY
DTC No.
Monitoring Item
Malfunction Detection Condition
Trouble Area
Detection Timing
Detection Logic
P0451
Canister pressure sensor abnormal voltage flu ...
Cruise Control Main Switch
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE STEERING PAD
(See page )
2. REMOVE CRUISE CONTROL MAIN SWITCH
(a) Remove the 2 screws.
(b) Disconnect t ...
Installation
INSTALLATION
PROCEDURE
1. INSTALL POWER DISTRIBUTION
(a) Connect the 3 connectors.
(b) Engage the 2 claws to temporarily install the power distribution
as shown in the illustration.
...