ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT SHIFT LOCK CONTROL UNIT ASSEMBLY
(a) Inspect the shift lock operation.
(1) Move the shift lever to P.
(2) Turn the ignition switch off.
(3) Check that the shift lever cannot be moved from P to any other position.
(4) Turn the ignition switch to ON, depress the brake pedal, and check that the shift lever can be moved from P to any other position.
If the operation cannot be done as specified, inspect the shift lock control unit.
(b) Inspect the shift lock release button operation.
(1) Turn the ignition switch off.
(2) When moving the shift lever with the shift lock release button pressed, check that the shift lever can be moved from P to any other position.
If the operation cannot be done as specified, inspect the shift lock control unit.
(c) Check the key interlock operation. (w/o Smart Key System)
(1) Turn the ignition switch to ON.
(2) Depress the brake pedal and move the shift lever to any position other than P.
(3) Check that the ignition key cannot be turned to LOCK.
(4) Move the shift lever to P, turn the ignition key to LOCK and check that the ignition key can be removed.
If the operation cannot be done as specified, inspect the shift lock control unit.
Components
COMPONENTS
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
...
Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL SHIFT SOLENOID VALVE SL4
(a) Coat the shift solenoid valve SL4 and bolt with ATF.
Text in Illustration
*1
Lock Plate
*2
Solenoid V ...
ECU Power Source Circuit
DESCRIPTION
This circuit provides power for main body ECU (driver side junction block assembly)
operation.
WIRING DIAGRAM
PROCEDURE
1.
CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY (MAIN BODY ECU (POWER SOURCE))
...