Toyota Venza: Noise Occurs from Generator while Engine is Running

Toyota Venza Service Manual / 1ar-fe Battery / Charging / Charging System / Noise Occurs from Generator while Engine is Running

PROCEDURE

1.	CHECK LOOSENESS OF V-RIBBED BELT

(a) Check the tension of the belt by pushing it down with a finger.

OK:

The tension of the belt is enough.

REPLACE V-RIBBED BELT TENSIONER ASSEMBLY

2.	CHECK V-RIBBED BELT FOR WEAR

(a) Check the V-ribbed belt for wear.

OK:

The V-ribbed belt is not worn.

REPLACE V-RIBBED BELT

3.	CHECK CLUTCH PULLEY FOR WEAR

(a) Check the clutch pulley groove for wear or other defects.

OK:

The clutch pulley groove is not damaged.

REPLACE CLUTCH PULLEY

4.	CHECK FOR NOISE WHILE CLUTCH PULLEY IS OPERATING

(a) Perform a road test and check if noise occurs when decelerating.

OK:

Noise does not occur.

REPLACE GENERATOR ASSEMBLY

REPLACE CLUTCH PULLEY

Charge Warning Light Comes ON while Driving

PROCEDURE 1. CHECK LOCK FUNCTION OF CLUTCH PULLEY (a) Check the lock function with the pulley installed in the vehicle. (1) Visually check that the rotor in the gene ...

Generator

...

Other materials about Toyota Venza:

Illumination for Panel Switch does not Come on with Tail Switch ON
PROCEDURE 1. CHECK VEHICLE SIGNAL (OPERATION CHECK) (a) Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check (See page ). ...

Console boxes
► Front Press the tab and slide to open. ► Rear 1. Pull up the lever to release the lock. 2. Slide the armrest fully rearward. 3. Lift the armrest to open. - When using the rear console box lid as an armrest If necessary, the con ...

Problem Symptoms Table
PROBLEM SYMPTOMS TABLE Front Power Seat Control System Symptom Suspected Area See page All functions do not operate P/SEAT fuse - Front power seat switch ...