Toyota Venza manuals

Toyota Venza: Main Body Ecu

Components

COMPONENTS

ILLUSTRATION


Removal

REMOVAL

PROCEDURE

1. REMOVE UPPER INSTRUMENT PANEL

HINT:

Refer to the procedure up to Remove Upper Instrument Panel Sub-assembly (See page ).


2. REMOVE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK ASSEMBLY)

(a) Disconnect the 4 connectors.


(b) Disengage the 2 claws and disconnect the connector <A> as shown in the illustration.


(c) Disconnect the 3 connectors.

(d) Disconnect the 3 connectors as shown in the illustration.


(e) Disconnect the connector <A> as shown in the illustration.


(f) Disconnect the connector.

(g) Disconnect the 2 connectors.


(h) Remove the 3 nuts.


(i) Disengage the 2 claws.

(j) Disconnect the connector <A> as shown in the illustration.


(k) Disconnect the 4 connectors and remove the main body ECU (driver side junction block assembly).

(l) Remove the 5 relays.


Installation

INSTALLATION

PROCEDURE

1. INSTALL MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK ASSEMBLY)

(a) Install the 5 relays.


(b) Connect the 4 connectors.


(c) Connect the connector <A> as shown in the illustration.

NOTICE:

Be sure to engage each connector securely.

(d) Engage the 2 claws.


(e) Install the 3 nuts and install the main body ECU (driver side junction block assembly).

(f) Connect the 2 connectors.

NOTICE:

Be sure to engage the connector securely.


(g) Connect the connector <A> as shown in the illustration.

NOTICE:

Be sure to engage the connector securely.


(h) Connect the connector.

NOTICE:

Be sure to engage each connector securely.

(i) Connect the 3 connectors as shown in the illustration.

NOTICE:

Be sure to engage each connector securely.


(j) Engage the 2 claws to connect the connector <A> as shown in the illustration.

NOTICE:

Be sure to engage the connector securely.


(k) Connect the 3 connectors.

NOTICE:

Be sure to engage each connector securely.

(l) Connect the 4 connectors.

NOTICE:

Be sure to engage each connector securely.


2. INSTALL UPPER INSTRUMENT PANEL

HINT:

Refer to the procedure from Install Upper Instrument Panel Sub-assembly (See page ).


Installation
INSTALLATION PROCEDURE 1. INSTALL POWER DISTRIBUTION (a) Connect the 3 connectors. (b) Engage the 2 claws to temporarily instal ...

Power Management Control Ecu
Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE FRONT DOOR SCUFF PLATE RH 2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH 3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COV ...

Other materials about Toyota Venza:

Control Module Performance (P0607)
MONITOR DESCRIPTION The ECM continuously monitors its internal processors (CPUs) and heated oxygen sensor transistors. This self-check ensures that the ECM is functioning properly. DTC No. DTC Detection Condition Trouble Ar ...

How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT ...

Data List / Active Test
DATA LIST / ACTIVE TEST 1. DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful bec ...

© 2016-2024 Copyright www.tovenza.com

0.1117