Toyota Venza manuals

Toyota Venza: Lost Communication with ECM (U0101,U0073,U0126,U0129,U0142,U0182,U1000)

Toyota Venza Service Manual / Lighting (ext) / Lighting System / Lost Communication with ECM (U0101,U0073,U0126,U0129,U0142,U0182,U1000)

DESCRIPTION

The DTCs are stored when the CAN communication system is malfunctioning.

DTC No.

DTC Detection Condition

Trouble Area

U0101

Lost communication with ECM

CAN communication system

U0073

Control module communication bus off

CAN communication system

U0126

Lost communication with steering angle sensor

CAN communication system

U0129

Lost communication with skid control ECU

CAN communication system

U0142

Lost communication with main body ECU (driver side junction block assembly)

CAN communication system

U0182

Lost communication with AFS ECU (headlight swivel ECU assembly)

CAN communication system

U1000

Can communication failure (message registry)

CAN communication system

PROCEDURE

1.

CHECK FOR DTC

(a) Clear the DTCs (See page ).


(b) Check for DTCs (See page ).


OK:

DTCs are not output.


OK

USE SIMULATION METHOD TO CHECK


NG

GO TO CAN COMMUNICATION SYSTEM

Light Sensor Circuit Malfunction (B1244)
DESCRIPTION The automatic light control sensor detects ambient light, converts it into an electrical signal, and outputs it to the main body ECU (driver side junction block assembly). The main bo ...

Automatic High Beam Mirror (B124A)
DESCRIPTION The DTC is stored when the main body ECU (driver side junction block assembly) detects malfunctions in the inner rear view mirror assembly. DTC No. DTC Detection ...

Other materials about Toyota Venza:

Display does not Dim when Light Control Switch is Turned ON
PROCEDURE 1. CHECK IMAGE QUALITY SETTING (a) Turn the light control switch to the tail or head position. (b) Check that the daytime screen setting on the display adjustment screen is set to on. Result ...

Data List / Active Test
DATA LIST / ACTIVE TEST 1. DATA LIST Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because in ...

LIN Communication Master Malfunction (B2287)
DESCRIPTION This DTC is stored when there is an open, short or ECU communication malfunction between the power management control ECU and certification ECU (smart key ECU assembly). DTC No. DTC Detection Condition Trouble A ...

© 2016-2024 Copyright www.tovenza.com

0.1472