DESCRIPTION
These DTCs are stored when the clearance warning ECU assembly cannot receive and recognize several signals via the CAN communication system.
DTC No. |
DTC Detection Condition |
Trouble Area |
---|---|---|
U0100 |
Lost Communication with ECM / PCM "A" |
CAN communication system |
U0101 |
Lost Communication with TCM |
|
U0142 |
Lost Communication with Body Control Module "B" |
|
U0155 |
Lost Communication with Instrument Panel Cluster Control Module (Combination Meter) |
HINT:
When 2 or more DTCs starting with "U" are output simultaneously, inspect the connectors and wire harnesses of each ECU.
PROCEDURE
1. |
CHECK DTC OUTPUT |
(a) Clear the DTCs (See page ).
(b) Check for DTCs (See page ).
Result |
Proceed to |
---|---|
DTCs (CAN communication system DTC) are output |
A |
No DTCs are output |
B |
A |
GO TO CAN COMMUNICATION SYSTEM |
B |
USE SIMULATION METHOD TO CHECK |
Power Back Door Touch Sensor
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE UPPER BACK WINDOW PANEL TRIM
2. REMOVE BACK DOOR PANEL TRIM ASSEMBLY
3. DISCONNECT POWER BACK DOOR ROD (for LH Side)
4. REMOVE BACK DOOR TRIM COVER
5. REMOVE POW ...
Security Indicator Light Circuit
DESCRIPTION
Even when the theft deterrent system is in the disarmed state, the security indicator
blinks due to a signal output from the immobiliser system. The security indicator
blinks continuously due to a continuous signal received from the immobilise ...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the navigation system.
*: Use the Techstream.
PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
...