Toyota Venza: Lost Communication with Automatic High Beam Sensor (B2432)
DESCRIPTION
Refer to DTC B2432 (Lighting system) (See page
.gif)
).
|
DTC No. |
DTC Detection Condition |
Trouble Area |
|---|---|---|
|
B2432 |
Malfunction in LIN communication system |
|
WIRING DIAGRAM
Refer to DTC B2432 (Lighting system) (See page
).
PROCEDURE
|
1. |
REFER TO DTC B2432 (Lighting system) |
See page
| NEXT | .gif) |
END |
No Response from Steering Lock ECU (B2786)
DESCRIPTION
This DTC is stored when LIN communication between the certification ECU (smart
key ECU assembly) and steering lock ECU (steering lock actuator assembly) stops
for more than 10 seconds ...
Communication Malfunction between ECUs Connected by LIN (B2785)
DESCRIPTION
This DTC is stored when LIN communication from the certification ECU stops for
a certain amount of time.
DTC No.
DTC Detection Condition
Trouble Area
...
Other materials about Toyota Venza:
Data List / Active Test
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches,
sensors, actuators and other items to be read without removing any parts. This non-intrusive
inspection can be very useful bec ...
AV Signal Stoppage (Low Battery Voltage) (B158F)
DESCRIPTION
This DTC is stored when a video or audio signal is interrupted due to battery
voltage input to the navigation receiver assembly dropping temporarily.
DTC No.
DTC Detection Condition
Trouble Area
...
Disassembly
DISASSEMBLY
PROCEDURE
1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting
the cable from the negative (-) battery terminal. Therefore, make sure to read the
disconnecting the cable from the neg ...
0.124