Toyota Venza: Installing child restraints

Toyota Venza Owners Manual / Before driving / Safety information / Installing child restraints

Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint.

The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Children) system.

Child restraint LATCH anchors

LATCH anchors are provided for the outboard rear seats.

(Buttons displaying the location of the anchors are attached to the seats.)

Seat belts equipped with a child restraint locking mechanism (ALR/ELR belts except driver’s seat belt)

Anchor bracket (for top tether strap)

Anchor brackets are provided for all rear seats.

Installation with LATCH system

Fold the seatback while pulling the lever. Return the seatback and secure it as upright as possible (1st lock position). Adjust the seatback to the 3rd lock position.

1. 1st lock position
2. 3rd lock position

► Type A

Widen the gap between the seat cushion
and seatback slightly.

Latch the hooks of the lower straps
onto the LATCH anchors.

The bars are installed in the clearance between the seat cushion and seatback.

If the child restraint has a top
tether strap, the top tether strap should be latched onto the top tether strap anchor.

For owners in Canada:

The symbol on a child restraint system indicates the presence of a lower anchorage system.

►Type B

Widen the gap between the seat cushion
and seatback slightly.

Latch the buckles onto the LATCH
anchors.

The bars are installed in the clearance between the seat cushion and seatback.

If the child restraint has a top
tether strap, the top tether strap should be latched onto the top tether strap anchor.

For owners in Canada:

The symbol on a child restraint system indicates the presence of a lower anchorage system.

Types of child restraints

Child restraint systems are classified into the following 3 types according to the age and size of the child. ► Rear facing -- Infant seat/convertible seat ► Forward facing -- Conv ...

Installing child restraints using a seat belt (child restraint lock function belt)

- Rear-facing -- Infant seat/convertible seat Place the child restraint system on the rear seat facing the rear of the vehicle. Run the seat belt through the child restraint system and ins ...

Other materials about Toyota Venza:

Disassembly
DISASSEMBLY PROCEDURE 1. INSPECT CONNECTING ROD THRUST CLEARANCE (a) Using a dial indicator, measure the thrust clearance while moving the connecting rod back and forth. Standard thrust clearance: 0.160 to 0.512 mm (0.00630 to 0.0202 i ...

Transfer Oil
On-vehicle Inspection ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT TRANSFER OIL (a) Remove the No. 1 transfer case plug and gasket. (b) Check that the oil level is between 0 and 5 mm (0 ...

Reverse Shift-linked Function of Power Mirrors does not Operate
SYSTEM DESCRIPTION On receiving a reverse signal from the park/neutral position switch assembly, the ECM sends the reverse signal to the main body ECU (driver side junction block assembly) via CAN communication. When receiving the reverse signal, the main ...