INSTALLATION
PROCEDURE
1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 13 Speakers)
(a) Install the rear No. 2 speaker assembly with the 2 screws. |
|
(b) Engage the clamp.
2. INSTALL REAR SPEAKER BRACKET (for 13 Speakers)
(a) Install the rear speaker bracket and rear door speaker grille sub-assembly with the 8 screws. |
|
3. INSTALL REAR SPEAKER ASSEMBLY
(a) Install the rear speaker assembly with the 3 bolts. |
|
(b) Connect the connector.
4. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP
5. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY
6. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL
7. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).
Precaution
PRECAUTION
1. NOTICE FOR INITIALIZATION
NOTICE:
When disconnecting the cable from the negative (-) battery terminal, initialize
the following system after the cable is reconnected.
System Name
See Procedure
Back Doo ...
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple
suspected areas are listed, the potential causes of the symptoms are listed in order
of probability in the "Suspected Area" column of ...
Engine Control System Malfunction (C1201/51)
DESCRIPTION
If a malfunction in the engine control system is detected, the operations of
VSC and TRAC are prohibited by the fail-safe function. When the signals from the
engine are input normally, the fail-safe is cancelled and the DTC is not stored.
...