INSTALLATION
PROCEDURE
1. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for 13 Speakers)
(a) Engage the 3 claws to install the front No. 3 speaker assembly. |
|
2. INSTALL FRONT PILLAR GARNISH CORNER PIECE (for 13 Speakers)
3. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY
(a) Connect the connector. |
|
(b) Install the front No. 2 speaker assembly with the 2 bolts. Torque: 11 N·m {112 kgf·cm, 8 ft·lbf} |
|
4. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
5. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY (for 13 Speakers)
(a) Connect the connector. |
|
(b) Install the center speaker assembly with the 2 bolts.
Torque:
11 N·m {112 kgf·cm, 8 ft·lbf}
6. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
7. INSTALL FRONT PILLAR GARNISH
8. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP
Freeze Frame Data
FREEZE FRAME DATA
1. CHECK FREEZE FRAME DATA
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Navigation System / Trouble
Codes.
(e) Select a DTC to ...
LVDS Signal Malfunction (from Extension Module) (B1532)
DESCRIPTION
The stereo component tuner assembly and the radio and display receiver assembly
are connected by an LVDS communication line.
This DTC is stored when an LVDS communication error occurs between the stereo
component tuner assembly and the radio ...
Floor mats
Use only floor mats designed specifically for vehicles of the same model and
model year as your vehicle. Fix them securely in place onto the carpet.
Insert the retaining hooks (clips) into the floor mat eyelets.
Turn the upper knob of each retaining ho ...