INSTALLATION
PROCEDURE
1. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY
(a) Install the rear center seat outer belt assembly with the bolt and nut. Torque: Bolt : 7.5 N·m {77 kgf·cm, 66 in·lbf} Nut : 42 N·m {428 kgf·cm, 31 ft·lbf} |
|
2. INSTALL REAR SEATBACK COVER WITH PAD
3. INSTALL REAR SEAT CENTER HEADREST SUPPORT RH
4. INSTALL REAR SEAT CENTER HEADREST SUPPORT LH
5. INSTALL REAR SEAT HEADREST SUPPORT RH
6. INSTALL REAR SEAT HEADREST SUPPORT LH
7. INSTALL REAR SEAT SHOULDER BELT COVER
(a) Engage the 2 guides and claw, and install the rear seat shoulder cover as shown in the illustration. |
|
(b) Engage the 2 guides as shown in the illustration. |
|
(c) Connect the rear seatback upper lock bezel with the screw. |
|
8. INSTALL REAR SEATBACK BOARD RH
9. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
(a) Connect the rear center seat outer belt with the bolt. Text in Illustration
Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} |
|
10. INSTALL REAR SEAT CUSHION COVER WITH PAD
11. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY
12. INSTALL REAR SEAT RECLINING COVER RH
13. INSTALL CENTER SEAT HINGE COVER RH
14. INSTALL REAR SEAT INNER RECLINING COVER RH
15. INSTALL REAR SEAT RECLINING RELEASE LEVER RH
16. INSTALL SEAT ADJUSTER COVER CAP RH
17. INSTALL REAR SEAT ASSEMBLY RH
18. INSTALL REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY
19. INSTALL REAR SEAT OUTER TRACK BRACKET COVER
20. INSTALL REAR SEAT INNER TRACK BRACKET COVER
21. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY
22. INSTALL REAR SEAT HEADREST ASSEMBLY
Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL STOP LIGHT SWITCH CUSHION
(a) Install the stop light switch cushion to the brake pedal support assembly.
2. INSTALL BRAKE PEDAL PAD
(a) Install the brake pedal pad to the brake pedal support assembly.
3. INSTALL BRAKE PEDA ...
Inspection
INSPECTION
PROCEDURE
1. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY
(a) Check operation of the lumbar support adjuster.
(1) Check if the lumbar support adjuster moves smoothly when the battery is connected
to the lumbar support adjuster motor connector te ...
Accessory Meter
Components
COMPONENTS
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL ACCESSORY METER ASSEMBLY (w/o Rear View Monitor System)
(a) Connect the connector.
(b) Engage the 2 clamps ...