INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY
NOTICE:
The regulator arm must be below the intermediate position when installing the front power window regulator motor assembly.
(a) Using a T25 "TORX" driver, install the front power window regulator motor assembly with the 3 screws. Torque: 5.4 N·m {55 kgf·cm, 48 in·lbf} HINT: A new front window regulator uses self-tapping screws to thread new installation holes when the self-tapping screws are inserted. |
|
2. INSTALL FRONT DOOR WINDOW REGULATOR ASSEMBLY
3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY
4. INSTALL FRONT DOOR SERVICE HOLE COVER
5. INSTALL DOOR SIDE AIRBAG SENSOR
6. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY
7. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
8. INSTALL COURTESY LIGHT ASSEMBLY
9. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)
10. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)
11. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).
13. INITIALIZE POWER WINDOW CONTROL SYSTEM
(See page )
14. INSPECT SRS WARNING LIGHT
(See page )
Blind Spot Mirrors
The Blind Spot Mirrors increase the view of surrounding area to assist the driver
when checking surrounding area before changing lanes.
1. Blind Spot Mirror field of view
2. Main mirror field of view
- Mirror angle can be adjusted when
►V ...
Luggage compartment features
- Cargo hooks
Cargo hooks are provided for securing loose items.
- Shopping bag hooks
- Auxiliary box
Lift the right side deck board.
- Luggage cover
Pull out the luggage cover and hook it on the anchors.
Removing luggage ...
On-vehicle Inspection
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
Be sure to follow the correct removal and installation procedures of the driver
side knee airbag assembly.
PROCEDURE
1. INSPECT DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
...