INSPECTION
PROCEDURE
1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY
(a) Inspect operation of the electrochromic inner mirror.
(1) Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.
(2) Press the AUTO switch.
(3) Attach black colored tape to the forward sensor to prevent it from sensing.
(4) Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.
Standard:
Mirror surface changes from bright to dark.
Text in Illustration
*a |
Component without harness connected |
*b |
w/o Automatic High Beam System |
*c |
w/ Automatic High beam System |
*1 |
Block colored Tape |
*2 |
Forward Sensor |
*3 |
Block colored Tape |
*4 |
Forward Sensor |
*5 |
Bright |
*6 |
Dark |
*7 |
Battery |
If the result is not as specified, replace the mirror assembly.
Pcv Valve
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE INTAKE MANIFOLD
(a) Remove the intake manifold (See page ).
2. REMOVE VENTILATION VALVE SUB-ASSEMBLY
(a) Disconnect the No. 2 ventilation hose from the ventilatio ...
ECM / PCM Internal Engine Off Timer Performance (P2610)
DTC SUMMARY
DTC No.
Monitoring Item
Malfunction Detection Condition
Trouble Area
Detection Timing
Detection Logic
P2610
Soak timer (built into ECM)
An ECM ...
Engine oil
With the engine at operating temperature and turned off, check the oil level
on the dipstick.
- Checking the engine oil
Park the vehicle on level ground.
After warming up the engine and turning it off, wait more than five minutes for
the oil to ...