Toyota Venza: Inspection

Toyota Venza Service Manual / Power Distribution / Integration Relay / Inspection

INSPECTION

PROCEDURE

1. INSPECT INTEGRATION RELAY

(a) Inner circuit (for 2GR-FE)

(1) for EFI MAIN relay

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
1A-1 - 1F-9	Battery positive (+) - 1A-1 Battery positive (+) - 1F-12 Battery negative (-) - 1F-4 Battery negative (-) - 1F-5	Below 1 Ω
1A-1 - 1F-9	Always	10 kΩ or higher
1A-1 - 1F-18	Battery positive (+) - 1A-1 Battery positive (+) - 1F-12 Battery negative (-) - 1F-4 Battery negative (-) - 1F-5	Below 1 Ω
1A-1 - 1F-18	Always	10 kΩ or higher

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

(2) for A/F relay

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1E-1 - Body ground

Battery positive (+) - 1A-1

Battery positive (+) - 1F-9

Battery positive (+) - 1F-18

Battery negative (-) - 1F-4

Battery negative (-) - 1F-5

Below 1 Ω

1A-1 - 1E-1

Always

10 kΩ or higher

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

(3) for F/PMP relay (for AWD)

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1A-1 - 1F-8

Always

10 kΩ or higher

1A-1 - 1F-10

Always

10 kΩ or higher

1F-8 - Body ground

Battery positive (+) - 1F-2

Battery positive (+) - 1F-12

Battery positive (+) - 1F-13

Battery negative (-) - 1F-3

Battery negative (-) - 1F-9

Battery negative (-) - 1F-18

Below 1 Ω

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

(4) for C/OPN relay

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
1F-9 - Body ground	Battery positive (+) - 1A-1 Battery positive (+) - 1F-2 Battery positive (+) - 1F-12 Battery negative (-) - 1F-3 Battery negative (-) - 1F-4 Battery negative (-) - 1F-5	Below 1 Ω
1A-1 - 1F-9	Always	10 kΩ or higher
1F-18 - Body ground	Battery positive (+) - 1A-1 Battery positive (+) - 1F-2 Battery positive (+) - 1F-12 Battery negative (-) - 1F-3 Battery negative (-) - 1F-4 Battery negative (-) - 1F-5	Below 1 Ω
1A-1 - 1F-18	Always	10 kΩ or higher

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

(5) for HORN relay

Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection

Condition

Specified Condition

1E-3 - Body ground

Battery positive (+) - 1A-1

Battery negative (-) - 1F-7

11 to 14 V

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

(6) for H-LP LO (LH) relay

Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection	Condition	Specified Condition
1D-1 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-17	11 to 14 V
1A-1 - 1D-1	Always	Below 1 V

Tester Connection

Condition

Specified Condition

1D-1 - Body ground

Battery positive (+) - 1A-1

Battery negative (-) - 1F-17

11 to 14 V

1A-1 - 1D-1

Always

Below 1 V

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

(7) for H-LP LO (RH) relay

Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection	Condition	Specified Condition
1D-2 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-17	11 to 14 V
1A-1 - 1D-2	Always	Below 1 V

Tester Connection

Condition

Specified Condition

1D-2 - Body ground

Battery positive (+) - 1A-1

Battery negative (-) - 1F-17

11 to 14 V

1A-1 - 1D-2

Always

Below 1 V

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

(8) for H-LP HI (DRL) relay

for Halogen headlight

Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection	Condition	Specified Condition
1A-1 - 1D-3	Always	Below 1 V
1A-1 - 1D-4	Always	Below 1 V
1F-15 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-15 Battery negative (-) - 1F-16	11 to 14 V
1F-15 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-15 Battery negative (-) - 1F-16	Pulse generation
1F-16 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-15 Battery negative (-) - 1F-16	11 to 14 V
1F-16 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-15 Battery negative (-) - 1F-16	Pulse generation

for HID headlight

Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection	Condition	Specified Condition
1A-1 - 1D-3	Always	Below 1 V
1A-1 - 1D-4	Always	Below 1 V
1F-15 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-15 Battery negative (-) - 1F-16	Pulse generation
1F-16 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-15 Battery negative (-) - 1F-16	Pulse generation

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

(b) Inner circuit (for 1AR-FE)

(1) for EFI MAIN No. 2 relay

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
1A-1 - 1F-9	Battery positive (+) - 1A-1 Battery positive (+) - 1F-12 Battery negative (-) - 1F-4 Battery negative (-) - 1F-5	Below 1 Ω
1A-1 - 1F-9	Always	10 kΩ or higher
1A-1 - 1F-18	Battery positive (+) - 1A-1 Battery positive (+) - 1F-12 Battery negative (-) - 1F-4 Battery negative (-) - 1F-5	Below 1 Ω
1A-1 - 1F-18	Always	10 kΩ or higher

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

(2) for EFI MAIN relay

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
1E-1 - Body ground	Battery positive (+) - 1A-1 Battery positive (+) - 1F-9 Battery positive (+) - 1F-18 Battery negative (-) - 1F-4 Battery negative (-) - 1F-5	Below 1 Ω
1A-1 - 1E-1	Always	10 kΩ or higher
1E-2 - Body ground	Battery positive (+) - 1A-1 Battery positive (+) - 1F-9 Battery positive (+) - 1F-18 Battery negative (-) - 1F-4 Battery negative (-) - 1F-5	Below 1 Ω
1A-1 - 1E-2	Always	10 kΩ or higher

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

(3) for C/OPN relay

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
1F-9 - Body ground	Battery positive (+) - 1A-1 Battery positive (+) - 1F-2 Battery positive (+) - 1F-12 Battery negative (-) - 1F-3 Battery negative (-) - 1F-4 Battery negative (-) - 1F-5	Below 1 Ω
1A-1 - 1F-9	Always	10 kΩ or higher
1F-18 - Body ground	Battery positive (+) - 1A-1 Battery positive (+) - 1F-2 Battery positive (+) - 1F-12 Battery negative (-) - 1F-3 Battery negative (-) - 1F-4 Battery negative (-) - 1F-5	Below 1 Ω
1A-1 - 1F-18	Always	10 kΩ or higher

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

(4) for HORN relay

Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection

Condition

Specified Condition

1E-3 - Body ground

Battery positive (+) - 1A-1

Battery negative (-) - 1F-7

11 to 14 V

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

(5) for H-LP LO (LH) relay

Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection	Condition	Specified Condition
1D-1 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-17	11 to 14 V
1A-1 - 1D-1	Always	Below 1 V

Tester Connection

Condition

Specified Condition

1D-1 - Body ground

Battery positive (+) - 1A-1

Battery negative (-) - 1F-17

11 to 14 V

1A-1 - 1D-1

Always

Below 1 V

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

(6) for H-LP LO (RH) relay

Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection	Condition	Specified Condition
1D-2 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-17	11 to 14 V
1A-1 - 1D-2	Always	Below 1 V

Tester Connection

Condition

Specified Condition

1D-2 - Body ground

Battery positive (+) - 1A-1

Battery negative (-) - 1F-17

11 to 14 V

1A-1 - 1D-2

Always

Below 1 V

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

(7) for H-LP HI (DRL) relay

for Halogen headlight

Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection	Condition	Specified Condition
1A-1 - 1D-3	Always	Below 1 V
1A-1 - 1D-4	Always	Below 1 V
1F-15 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-15 Battery negative (-) - 1F-16	11 to 14 V
1F-15 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-15 Battery negative (-) - 1F-16	Pulse generation
1F-16 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-15 Battery negative (-) - 1F-16	11 to 14 V
1F-16 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-15 Battery negative (-) - 1F-16	Pulse generation

for HID headlight

Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection	Condition	Specified Condition
1A-1 - 1D-3	Always	Below 1 V
1A-1 - 1D-4	Always	Below 1 V
1F-15 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-15 Battery negative (-) - 1F-16	Pulse generation
1F-16 - Body ground	Battery positive (+) - 1A-1 Battery negative (-) - 1F-15 Battery negative (-) - 1F-16	Pulse generation

Text in Illustration

*1	Component without harness connected (Integration Relay)

HINT:

If the result is not as specified, replace the integration relay.

Removal

REMOVAL PROCEDURE 1. REMOVE POWER DISTRIBUTION (a) Remove the bolt. (b) Disengage the 2 claws and disconnect the power distribution from t ...

Other materials about Toyota Venza:

Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART HINT: If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to "See page" in the DTC chart. Inspect the fuses and relays before troub ...

Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device
PROCEDURE 1. CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL (a) Check if track information is displayed normally on another "Bluetooth" audio compatible vehicle of the same model. ...

Data List / Active Test
DATA LIST / ACTIVE TEST 1. DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful bec ...

Toyota Venza: Inspection

Components

Removal

Other materials about Toyota Venza: