INSPECTION
PROCEDURE
1. INSPECT VACUUM SWITCHING VALVE ASSEMBLY (for ACIS)
(a) Measure the resistance according to the value(s) in the table below. Text in Illustration
Standard Resistance:
If the result is not as specified, replace the air cleaner assembly. |
|
(b) Check the vacuum switching valve operation.
(1) When vacuum is applied to port E, check that air is sucked into the filter. Text in Illustration
If the result is not as specified, replace the air cleaner assembly. |
|
(2) Apply battery voltage across the terminals. When vacuum is applied to port F, check that air is sucked into port E. Text in Illustration
If the result is not as specified, replace the air cleaner assembly. |
|
Illumination Circuit
DESCRIPTION
Power is supplied to the radio and display receiver assembly and steering pad
switch assembly illumination when the light control switch is in the tail or head
position.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
The vehicle ...
Lost Communication with "Seat Control Module A" (U0208)
DESCRIPTION
DTC No.
DTC Detection Condition
Trouble Area
U0208
No communication from the position control ECU and switch assembly.
Position control ECU and switch assembly bran ...
Vehicle load limits
Vehicle load limits include total load capacity, seating capacity, Trailer
Weight Rating (TWR) and cargo capacity.
- Total load capacity (Vehicle capacity weight):
Total load capacity means the combined weight of occupants, cargo and luggage.
&nbs ...