CAUTION / NOTICE / HINT
HINT:
*: Use the Techstream
PROCEDURE
1. |
VEHICLE BROUGHT TO WORKSHOP |
|
2. |
CUSTOMER PROBLEM ANALYSIS |
(a) Confirm problem symptoms (See page ).
|
3. |
PASSENGER AIRBAG ON/OFF INDICATOR CHECK |
(a) Proceed to Diagnosis System (See page
).
|
4. |
DTC CHECK (Present and Past DTCs)* |
(a) Proceed to DTC Check / Clear (See page
).
Result |
Proceed to |
---|---|
DTC is output. |
A |
DTC is not output. |
B |
B |
GO TO PROBLEM SYMPTOMS TABLE |
|
5. |
DIAGNOSTIC TROUBLE CODE CHART |
(a) Proceed to Diagnostic Trouble Code Chart (See page ).
|
6. |
CIRCUIT INSPECTION* |
|
7. |
REPAIR |
|
8. |
CLEAR DTCS (Present and Past DTCs)* |
(a) Clear the DTCs (See page ).
|
9. |
DTCS CHECK (Present and Past DTCs)* |
(a) Check for DTCs (See page ).
Result |
Proceed to |
---|---|
DTC is not output. |
A |
DTC is output. |
B |
B |
GO TO DIAGNOSTIC TROUBLE CODE CHART |
|
10. |
SYMPTOM SIMULATION |
(a) Check the passenger airbag ON/OFF indicator condition (See page ).
Result |
Proceed to |
---|---|
Passenger airbag ON/OFF indicator operates normally. |
A |
Passenger airbag ON/OFF indicator ("OFF") and SRS warning light come on. |
B |
B |
GO TO DIAGNOSTIC TROUBLE CODE CHART |
|
11. |
CONFIRMATION TEST |
NEXT |
END |
Inspection
INSPECTION
PROCEDURE
1. INSPECT FRONT OIL PUMP AND GEAR BODY SUB-ASSEMBLY
(a) Turn the drive gear with 2 screwdrivers and make sure that it rotates
smoothly.
NOTICE:
Be careful not to damage the oil seal lip.
...
Front Stabilizer Bar(for 2gr-fe 2wd)
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT FRAME ASSEMBLY (When Using the Engine Support Bridge)
(See page )
2. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (When Not Using the Engine Support Bridge)
(See page )
3. ...
Precaution
PRECAUTION
1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
After the ignition switch is turned off, the radio and display receiver
assembly records various types of memory and settings. As a result, after
turning ...