General Maintenance
GENERAL MAINTENANCE
CAUTION / NOTICE / HINT
HINT:
Perform these procedures after the engine has cooled down.
PROCEDURE
1. INSPECT DRIVE BELT
Engine Type |
See Procedure |
---|---|
2GR-FE |
See page |
1AR-FE |
See page |
2. REPLACE ENGINE OIL AND OIL FILTER
Engine Type |
See Procedure |
---|---|
2GR-FE |
See page |
1AR-FE |
See page |
3. REPLACE ENGINE COOLANT
Engine Type |
See Procedure |
---|---|
2GR-FE |
See page |
1AR-FE |
See page |
4. INSPECT SPARK PLUGS
Engine Type |
See Procedure |
---|---|
2GR-FE |
See page |
1AR-FE |
See page |
5. INSPECT BATTERY
Engine Type |
See Procedure |
---|---|
2GR-FE |
See page |
1AR-FE |
See page |
6. INSPECT AIR CLEANER FILTER ELEMENT
(a) Remove the air filter.
(b) Check that the air cleaner is not excessively dirty. If the air cleaner is excessively dirty, replace the air cleaner filter element. |
|
(c) If cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.
(d) Reinstall the air filter.
7. INSPECT EXHAUST PIPES AND MOUNTINGS
(a) Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
8. INSPECT FUEL TANK CAP GASKET
Engine Type |
See Procedure |
---|---|
2GR-FE |
See page |
1AR-FE |
See page |
9. INSPECT FUEL LINES, CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BANDS
(a) Visually check the fuel lines and hoses for cracks, leaks, loose connections or deformation.
(b) Check for tank band looseness or deformation.
10. INSPECT CHARCOAL CANISTER
Engine Type |
See Procedure |
---|---|
2GR-FE |
See page |
1AR-FE |
See page |
Check CAN Bus Line for Short to GND
DESCRIPTION
There may be a short circuit between the CAN bus main wire and GND when there
is no resistance between terminals 6 (CANH) and 4 (CG) or 14 (CANL) and 4 (CG) of
the DLC3.
Symptom
Trouble Area
No resistanc ...
Driving the vehicle
The following procedures should be observed to ensure safe driving.
- Starting the engine
- Driving
With the brake pedal depressed,
shift the shift lever to “D”.
Release the parking brake.
Gradually release the brake pedal
and gentl ...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the power mirror control
system.
*: Use the Techstream.
PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
...