Toyota Venza: Dtc Check / Clear

Toyota Venza Service Manual / Seat / Front Power Seat Control System(w/ Memory) / Dtc Check / Clear

DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(d) Enter the following menus: Body Electrical / Driver Seat / Trouble Codes.

(e) Check for DTCs (See page ).

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(d) Enter the following menus: Body Electrical / Driver Seat / Trouble Codes.

(e) Clear the DTCs.

Terminals Of Ecu

TERMINALS OF ECU 1. CHECK POSITION CONTROL ECU AND SWITCH ASSEMBLY (a) Disconnect the T10 and T11 position control ECU and switch assembly connectors. (b) Measure the voltage and resistance accor ...

Data List / Active Test

DATA LIST / ACTIVE TEST 1. DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any p ...

Other materials about Toyota Venza:

System Description
SYSTEM DESCRIPTION 1. FRONT POWER SEAT CONTROL SYSTEM DESCRIPTION The driver seat is equipped with slide, reclining, lifter, front vertical and lumbar support adjustment functions. 2. FUNCTION OF MAIN COMPONENTS The following functions are available: ...

Rear Wheel Alignment
Adjustment ADJUSTMENT PROCEDURE 1. INSPECT TIRES (a) Inspect the tires (See page ). 2. MEASURE VEHICLE HEIGHT 3. INSPECT CAMBER Camber (Unloaded Vehicle): Model Engine Camber Inclination Right-left Dif ...

Navigation Receiver Assembly Power Source Circuit
DESCRIPTION This is the power source circuit to operate the navigation receiver assembly. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following inspection procedure. PROCE ...