Toyota Venza: Disassembly

Toyota Venza Service Manual / U660e Automatic Transmission / Transaxle / Valve Body Assembly(when Not Using The Engine Support Bridge) / Disassembly

DISASSEMBLY

PROCEDURE

1. REMOVE TRANSMISSION WIRE

2. REMOVE ATF TEMPERATURE SENSOR ASSEMBLY

(a) Remove the 4 bolts, ATF temperature sensor assembly and clamp from the valve body assembly.

Text in Illustration

Clamp

(b) Remove the O-ring from the ATF temperature sensor assembly.

Text in Illustration

O-ring

3. REMOVE SHIFT SOLENOID VALVE SL

(a) Remove the shift solenoid valve SL from the valve body assembly.

4. REMOVE SHIFT SOLENOID VALVE SLT

(a) Remove the lock plate and shift solenoid valve SLT from the valve body assembly.

Text in Illustration

*1	Lock Plate
*2	Solenoid Valve SLT
*3	Solenoid Valve SLU

5. REMOVE SHIFT SOLENOID VALVE SLU

(a) Remove the shift solenoid valve SLU from the valve body assembly.

6. REMOVE SHIFT SOLENOID VALVE SL2

(a) Remove the bolt, lock plate and shift solenoid valve SL2 from the valve body assembly.

Text in Illustration

*1	Lock Plate
*2	Solenoid Valve SL2
*3	Solenoid Valve SL1

7. REMOVE SHIFT SOLENOID VALVE SL1

(a) Remove the shift solenoid valve SL1 from the valve body assembly.

8. REMOVE SHIFT SOLENOID VALVE SL3

(a) Remove the bolt, lock plate and shift solenoid valve SL3 from the valve body assembly.

Text in Illustration

*1	Lock Plate
*2	Solenoid Valve SL3

9. REMOVE SHIFT SOLENOID VALVE SL4

(a) Remove the bolt, lock plate and shift solenoid valve SL4 from the valve body assembly.

Text in Illustration

*1	Lock Plate
*2	Solenoid Valve SL4

Components

COMPONENTS ILLUSTRATION ILLUSTRATION ...

Removal

REMOVAL PROCEDURE 1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY HINT: See the steps from "Remove Engine Assembly with transaxle" through "Remove Automatic Transaxle Assembly" (See p ...

Other materials about Toyota Venza:

Removal
REMOVAL CAUTION / NOTICE / HINT NOTICE: If automatic transaxle assembly parts are replaced, refer to Parts Replacement Compensation Table to determine if any additional operations are necessary (See page ). PROCEDURE 1. DISCHARGE FUEL PRESSURE See p ...

System Description
SYSTEM DESCRIPTION 1. ILLUMINATED ENTRY SYSTEM (a) The illuminated entry system has the following control functions: Control Outline Lights that Operate Actuation Area-linked*2 When a registered k ...

Power Back Door cannot be Opened or Closed Using the Power Back Door Switch
DESCRIPTION When the power back door cannot be opened or closed using the power back door control switch, one of the following may be malfunctioning: 1) power back door control switch circuit, 2) power back door ECU (power back door motor unit) or 3) main ...