Components
COMPONENTS
ILLUSTRATION
Replacement
REPLACEMENT
PROCEDURE
1. DRAIN AUTOMATIC TRANSAXLE FLUID
(a) Remove the No. 2 engine under cover and front fender apron LH.
(b) Using a 6 mm socket hexagon wrench, remove the overflow plug and gasket from the automatic transaxle. |
|
(c) Remove the refill plug and gasket from the automatic transaxle. |
|
(d) Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube from the automatic transaxle. |
|
(e) Drain automatic transaxle fluid from the automatic transaxle.
(f) Using a 6 mm socket hexagon wrench, install the No. 1 transmission oil filler tube to the automatic transaxle. Torque: 1.7 N·m {17 kgf·cm, 15 in·lbf} |
|
(g) Using a 6 mm socket hexagon wrench, install a new gasket and the overflow plug to the automatic transaxle. Torque: 40 N·m {408 kgf·cm, 30 ft·lbf} |
|
(h) Install a new gasket and the refill plug to the automatic transaxle. Torque: 49 N·m {500 kgf·cm, 36 ft·lbf} |
|
2. REMOVE FRONT DRIVE SHAFT ASSEMBLY
HINT:
See page
3. REMOVE TRANSAXLE CASE OIL SEAL
(a) Using SST, tap out the transaxle case oil seal. SST: 09308-00010 |
|
4. REMOVE FRONT TRANSAXLE CASE OIL SEAL
(a) Using SST, tap out the front transaxle case oil seal. SST: 09308-00010 |
|
5. INSTALL TRANSAXLE CASE OIL SEAL
(a) Using SST and a hammer, tap in a new transaxle case oil seal. SST: 09316-10010 SST: 09950-70010 09951-07100 Oil seal driven in depth: -0.5 to 0.5 mm (-0.0197 to 0.0197 in.) NOTICE: Check that the oil seal is installed in the correct direction. |
|
(b) Coat the lip of the transaxle case oil seal with MP grease.
6. INSTALL FRONT TRANSAXLE CASE OIL SEAL
(a) Using SST and a hammer, tap in a new front transaxle case oil seal. SST: 09316-60011 09316-00011 Oil seal driven in depth: -0.5 to 0.5 mm (-0.0197 to 0.0197 in.) NOTICE: Check that the oil seal is installed in the correct direction. |
|
(b) Coat the lip of the front transaxle case oil seal with MP grease.
7. INSTALL FRONT DRIVE SHAFT ASSEMBLY
HINT:
See page
8. ADD AUTOMATIC TRANSAXLE FLUID
HINT:
See page
Freeze Frame Data
FREEZE FRAME DATA
1. FREEZE FRAME DATA
NOTICE:
Freeze frame data values will vary depending on the measurement conditions,
surroundings, or vehicle conditions. For this reason, there may be a problem
even when the values are within specifica ...
Turn Signal Flasher Assembly
Components
COMPONENTS
ILLUSTRATION
Inspection
INSPECTION
PROCEDURE
1. INSPECT TURN SIGNAL FLASHER ASSEMBLY
(a) Disconnect the D34 turn signal flasher assembly connector.
(b) Measure the vo ...
HD Radio Tuner Malfunction (B1551,B15A0,B15AD,B15B0,B15B3,B15B4,B15B7)
DESCRIPTION
These DTCs are stored when a malfunction occurs in the navigation receiver assembly.
DTC No.
DTC Detection Condition
Trouble Area
B1551
When any of the following conditions is met:
...