Toyota Venza manuals

Toyota Venza: Detection range of the sensors


1. Approximately 1.6 ft. (50 cm) 2. Approximately 4.9 ft. (150 cm) 3. Approximately 2.0 ft. (60 cm)

The diagram shows the detection range of the sensors. Note that the sensors cannot detect obstacles that are extremely close to the vehicle.

The range of the sensors may change depending on the shape of the object etc.

 - Sensor detection information

• Certain vehicle conditions and the surrounding environment may affect the ability of the sensor to correctly detect obstacles. Particular instances where this may occur are listed below.

• There is dirt, snow or ice on the sensor.

• A sensor is frozen.

• A sensor is covered in any way.

• The vehicle is leaning considerably to one side.

• On an extremely bumpy road, on an incline, on gravel, or on grass.

• The vicinity of the vehicle is noisy due to vehicle horns, motorcycle engines, air brakes of large vehicles, or other loud noises producing ultrasonic waves.

• There is another vehicle equipped with parking assist sensors in the vicinity.

• A sensor is coated with a sheet of spray or heavy rain.

• The vehicle is equipped with a fender pole or wireless antenna.

• A bumper or sensor receives a strong impact.

• The vehicle is approaching a tall or curved curb.

• In harsh sunlight or intense cold weather.

• A non-genuine Toyota suspension (lowered suspension etc.) is installed.

In addition to the examples above, there are instances in which, because of their shapes, signs and other objects may be judged by the sensor to be closer than they are.

• The shape of the obstacle may prevent the sensor from detecting it. Pay particular attention to the following obstacles:

• Wires, fences, ropes, etc.

• Cotton, snow and other materials that absorb sound waves • Sharply-angled objects • Low obstacles
• Tall obstacles with upper sections projecting outwards in the direction of your vehicle

 - If the display flashes and a message is displayed

 - Certification (Canada only)

CAUTION

 - Caution when using the Intuitive parking assist

Observe the following precautions.

Failing to do so may result in the vehicle being unable to be driven safely and possibly cause an accident.

• Do not use the sensor at speeds in excess of 6 mph (10 km/h).

• Do not attach any accessories within the sensor range.

NOTICE
 - Notes when washing the vehicle

Do not apply intensive bursts of water or steam to the sensor area.

Doing so may result in the sensor malfunctioning.

The distance display and buzzer
When a sensor detects an obstacle, the direction of and the approximate distance to the obstacle are displayed and the buzzer sounds.  - Corner sensor operation and distance to an obstacle Th ...

Driving assist systems
To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and sh ...

Other materials about Toyota Venza:

Disassembly
DISASSEMBLY CAUTION / NOTICE / HINT NOTICE: When disassembling the multiplex network door ECU, eliminate static electricity by touching the vehicle body to prevent the components from being damaged. PROCEDURE 1. REMOVE MULTIPLEX NETWORK DOOR ECU ...

Fuel Injector Circuit
DESCRIPTION The fuel injector assemblies are located on the intake manifold. They inject fuel into the cylinders based on signals from the ECM. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system befo ...

Steering Angle Sensor Circuit Malfunction (C1231/31)
DESCRIPTION The steering angle sensor signal is sent to the skid control ECU via the CAN communication system. When there is a malfunction in the CAN communication system, it will be detected by the steering angle sensor zero point malfunction diagnostic ...

© 2016-2024 Copyright www.tovenza.com

0.1355